Got my RAID LED lights tinted (few pics)

[dannyk]

aphix: I have read somewhere before that the brake light switch can sometimes fail, maybe worth looking at this?

Cheers

Danny

 

[aphix]

possible.. where abouts is that... had a look.. it started to rain.. went inside

Thanks danny.

Rob

 

[dannyk]

Its located under the brake pedal, i belive the mount cant snap.

Danny

 

[dannyk]

Found the thread i was reading:

http://www.seatcupra.net/forums/showthread.php?t=72950&highlight=brake+light+switch

Seems it made just need adjusting??? hopefully!!

Cheers

Danny

 

[RobDon]

Finally got a response from the clear black guys, they're moving premesis just now and there is a 10 day waiting list - but they're doing my OE rear lights and side indicators in 2 weeks time.

 

[Copra]

Robdon, be sure to post some pics when done?

 

[FILOU]

hello!
I put resistences and my fuses roast... I buy this:
2 resistences 5W 30 Ohms
4 resistences 12W 12 Ohms
the problem it is that from with dimensions goes and as soon as I pose the other with dimensions and that I light fires Ca jumps the fuse! What put like power of resistences? Thank you

 

[aphix]

you need 25w 6ohm resistors... or x2 25w 12ohm resitors wired in paralell as the 25w 6ohms are hard to come by.

Rob

 

[aphix]

just out of interest.. why did you choose those values for the resitors?

Rob

 

[FILOU]

It's difficult ! i am anxious

 

[aphix]

you need to replicate the presence of a bulb... if you put the wrong value of resitors in you will blow fuses.. you also run the risk of setting your car on fire..

Thats why im interested in why you chose those resistors.. becuase im completley confused *confused face*

The ONLY way you will get it to work is getting to the value of 6ohms.. and the resistors HAVE to be 25w

Rob

 

[leon291155]

they fit the platinum colour ... looks good mate bt we wanna pic to the car exterior .. the whole car..

 

[Stephenpalm]

I have ordered my lights from this link [email protected]... they arrive today, the guy said he would throw some silver light bulbs in to make them leagal, for road use.
Looking at your information now, do i have to go through this resistor setup now aswell?

 

[J@mes]

if they are the raid LED ones then yes!

 

[J@mes]

Here mate your car is fantastic, by far the nicest Leon ive seen.

Well done.

why thankyou!

 

[J@mes]

well its very easy to fit the resistors... just look at the diagram and make sure u connet it to the correct wires!

 

[FILOU]

if I understood I need two resistences of 6 ohm of 25 Watts.
For each one ? yes ?
Can you make me photographs clearer ? thank you very much

 

[FILOU]

if I understood I need two resistences of 6 ohm of 25 Watts.
For each one ? yes ?
Can you make me photographs clearer ? thank you very much

can you give me a site to buy the elements ?

 

[J@mes]

eveything is in the posts above m8... read it FROM the begining again!

and maybe pm rob!?

 

[FILOU]

eveything is in the posts above m8... read it FROM the begining again!

and maybe pm rob!?

Yes but my english is bad sorry
I don't find resistenses on the web