-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
What did you and your MK2 do today?
- Thread starter Tfsi_Mike
- Start date
Think I found the cause gearbox issue I have been having. When still it would go into first fine but if moving then it would resist going into first on the first attempt but release pressure and push again it would go into first ok. On the top where the arms attach to the gearbox i noticed some shiney scrape marks. Went to move the arm and it was extremely wobbly with the arm scraping on the gearbox need to test tonight and get a socket on it but finger tightened it to stop the arm scraping. You can see where its cut the sticker in half and made shiney metal.
Nut has come loose again so tightened the nut and will put some threadlock on it tomorrow.
I know there are other options but these worked just fine for me and are v bright.
https://forums.seatcupra.net/index....ur-mk2-do-today.323748/page-1015#post-4782838
Blocked the EGR vacuum, engine seems more responsive but that could be a placebo. Noticed oil spray coming out of the EGR but not sure if that’s new or not.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Installed a new diverter valve made by GFB and also installed a new short shifter from forge sport
What's the difference between the gfb diverter and the standard revision g??
Sent from my SM-G960F using Tapatalk
The main thing is that it sharper throttle response and faster boost recovery when changing gears.
https://www.gfb.com.au/products/blo...suits-late-model-vag-euro-applications-detail
^ if you want to see all the things it does
Thanks mate
Sent from my SM-G960F using Tapatalk
I'm making a video for GFB-UK so if u want to see a review of it keep an eye on here later in the week.
No it's been off a few times since I have had the car, must say it's a crap design to have the filter in the engine cover.
However I do see the need for a cover as the 2.0 tfsi engine is one ugly looking engine
Sent from my SM-G960F using Tapatalk
However I do see the need for a cover as the 2.0 tfsi engine is one ugly looking engine
Sent from my SM-G960F using Tapatalk
Last edited:
So now I've had, cam chain and tensioner done. Cambelt and water pump replaced. Inlet valves walnut blasted and injectors cleaned. New oil pick up. Full service. Helix clutch kit and braided clutch line. All done over the last 3 months. Getting ready for tte480
Ace. What power you running at the moment? What you going to do handling wise for putting down the power? I'm ordering a wavetrac when the garage open in an hour.
Similar threads
