DaNnY_LaD's IHI'd Cupra ( End Of a Eara 08/11/2009)

[ChrisCurzon]

	Group A:	'001				Group B:	'032	
		RPM	Temperature	Lambda	Bin. Bits		Lambda	Lambda
	TIME					TIME		
MARKER	STAMP	 /min	°C	%		STAMP	%	%
	5.13	920	72	-6.3	10111110	5.63	0	0
	6.12	920	72	-8.6	10111110	6.52	0	0
	7.04	920	72	-5.5	10111110	7.44	0	0
	7.84	920	72	-6.3	10111110	8.24	0	0
	8.63	920	72	-7.8	10111110	9.03	0	0
	9.53	920	72	-6.3	10111110	10.03	0	0
	10.52	920	72	-3.9	10111110	10.92	0	0
	11.43	960	72	-7.8	10111110	11.83	0	0
	12.23	920	72	-5.5	10111110	12.63	0	0
	13.32	920	72	93	103.95	22.52	0	0
	23.03	920	73	-7	10111110	23.43	0	0
	23.83	920	73	-7	10111110	24.23	0	0
	24.63	920	73	-5.5	10111110	25.13	0	0
	25.62	920	73	-7.8	10111110	26.12	0	0
	26.63	920	73	-6.3	10111110	27.01	0	0
	27.41	960	73	-4.7	10111110	27.81	0	0
	28.21	960	73	-2.3	10111110	28.61	0	0
	29.01	920	73	-6.3	10111110	29.41	0	0
	29.81	920	73	-7.8	10111110	30.21	0	0
	30.61	960	74	-5.5	10111110	31.01	0	0
	31.41	920	73	-3.1	10111110	31.81	0	0
	32.21	920	74	-3.9	10111110	32.61	0	0
	33.01	920	74	-6.3	10111110	33.41	0	0
	33.91	920	74	-4.7	 ?	43.11	0	0
	43.51	960	75	0	10111110	44.01	0	0
	44.52	960	75	3.9	10111110	44.92	0	0
	45.32	920	75	3.9	10111110	45.72	0	0

 

[DaNnY_LaD]

Have We done it right bill?

 

[ibizacupra]

idle fuel trim looks ok.. what is block 032 say

 

[ChrisCurzon]

Block 032 is on that log Bill and it didn' do anything, as you can see it just shows zero. Don't know if it will have changed now hes driven it?
We can always re-do this one if need be

 

[DaNnY_LaD]

Im wondering would i benefit from a 20vt Large port Head? As ive been offered on with 40k miles with 20v n/a cams inside for £200 posted..

It would make it easy for me todo this so i can get the head built 1st...

Worth a punt or not?

 

[ibizacupra]

largeport head will flow more than your smallport, but your turbo aint maxing out your smallport yet

 

[DaNnY_LaD]

Thanks Bill

Filled her up tonight and took her for a spin with the misses...Went for a drive for around 30miles which was nice been sooo long since i drove it prober at all..
Im going to check my water pump this weekend as the gauge went past 90degree but only to the next notch.. i have a feeling i hadn't got all the air out of the system when i fitted the thermostat would i be right?The fans are coming on tho....

Got some little vids of it 2night excuse me lol i was like a little kid..
Its just felt prober nippy love down...Just goes to show what drivin a transit can do to you lol
http://www.youtube.com/watch?v=9VN58b3GUXU

In this one is for the exhaust note but once its warmed up and you rev it you can see it cutting out...this happens coming up to junction when i rev it too much? Boost leak ???

http://www.youtube.com/watch?v=kv6yHfDYocY

 

[DaNnY_LaD]

Any one any ideas one what could be causing it to randomly cut out?

 

[DaNnY_LaD]

Filled her up tonight and took her for a spin with the misses...Went for a drive for around 30miles which was nice been sooo long since i drove it prober at all..
Im going to check my water pump this weekend as the gauge went past 90degree but only to the next notch.. i have a feeling i hadn't got all the air out of the system when i fitted the thermostat would i be right?The fans are coming on tho....

Got some little vids of it 2night excuse me lol i was like a little kid..
Its just felt prober nippy love down...Just goes to show what drivin a transit can do to you lol
http://www.youtube.com/watch?v=9VN58b3GUXU

In this one is for the exhaust note but once its warmed up and you rev it you can see it cutting out...this happens coming up to junction when i rev it too much? Boost leak ???

http://www.youtube.com/watch?v=kv6yHfDYocY

 

[DaNnY_LaD]

righto im leaking from the coolant banjo holes on the coolant line for the IHI...They seem to be m14 as the Holes on the turbo & Banjo bolts im using are a M12...So its leaking abit of water...

Now this is what i got with the IHI wen i bought it...Could i cut the Coolant line and fit this on to it and jubliee clip it on it?

The piece im on about which m12 coolant Setup..

And this is the coolant line ive got on at the moment...Could i just cut the bolt banjo off and slip the hose over the other part and jubliee clip it..

 

[pj1985]

The lines I got were considered not upto par when my IHI was being fitted so they had some new ones made for similar problems you are experiencing. This was for both oil and water.

 

[DaNnY_LaD]

The lines I got were considered not upto par when my IHI was being fitted so they had some new ones made for similar problems you are experiencing. This was for both oil and water.

Yup...Be doning some measuring and this IHI water Banjo i have here would work a treat...

Would fit inside my Coolant line too and a jublie clip around it..

What you think?worthy of a try..

 

[DaNnY_LaD]

After Mucho Pissing about we've desided to make are own Coolant lines...to say the least im pissed of that i paid for these lines expecting them to ****ing fit....which they clearly don't

we've salvaged the Barbed Jointer & Coolant Banjo fitting on the block side seems all we have todo is get some 10mm I.D Braided Line and jubliee clip it on as each fitting has a barbed edge..Only a Small set back but something i should'nt have to fix...

Anyway the bits were using which fit PERFECT...

 

[ChrisCurzon]

Thanks Chris for all your help and genius ideas! Yet another late night on your car Daniel.....you can repay with jaffa cakes, brews and chocolate biscuits

 

[DaNnY_LaD]

Thanks Chris for all your help and genius ideas! Yet another late night on your car Daniel.....you can repay with jaffa cakes, brews and chocolate biscuits

lol Ta lad O and cheers lauren..

I gotta keep you sweet mate My Cuppas are Awesome though aint they

 

[DaNnY_LaD]

This what i need Chris...

1,5m of this :
http://www.merlinmotorsport.co.uk/p...(10mm)-I.D.-(PER-1/2-METRE)/product_info.html

 

[ChrisCurzon]

Thats the stuff mate, if it can carry fuel im sure it'll carry water! 1.5 metres should be plenty too

 

[DaNnY_LaD]

Thats the stuff mate, if it can carry fuel im sure it'll carry water! 1.5 metres should be plenty too

Bought 1500mm of it....came to £20 posted....

 

[DaNnY_LaD]

Just Out of interest would a Boost/vac leak cause it to cut out?

 

[barnsley]

Just Out of interest would a Boost/vac leak cause it to cut out?

vac leak would

have you reset the throttle body