what have you done to your car today ?

[Yellow fr]

I get that with G101 (inerior plastics soap) so i just water it down

@bigT’s lcr I don’t get any off that as I always water G101 down


Sent from my iPhone using Tapatalk

 

[bigT's lcr]

@bigT’s lcr I don’t get any off that as I always water G101 down


Sent from my iPhone using Tapatalk

I meant water it down more than 10:1 lol more like 15:1

 

[iammooks]

They should not need the wheels off for the alignment but you should be able to see if there is any rubbing on the flex pipe


Sent from my iPhone using Tapatalk

Had a feel around and I don't get the impression it's rubbing - I had the wheel at full lock so I could get a look in, and they weren't touching, but there would be a chance that the flex pipe would touch when turned full lock the other way. I'll try and get a jack out and have a closer look, but I don't get the impression anything catastrophic is happening. Thanks for the eagle eyes though - I'll make sure I keep an eye on it.

 

[Yellow fr]

Had a feel around and I don't get the impression it's rubbing - I had the wheel at full lock so I could get a look in, and they weren't touching, but there would be a chance that the flex pipe would touch when turned full lock the other way. I'll try and get a jack out and have a closer look, but I don't get the impression anything catastrophic is happening. Thanks for the eagle eyes though - I'll make sure I keep an eye on it.

It’s ok sometimes I can’t get out off work mode when looking at cars


Sent from my iPhone using Tapatalk

 

[g60stu]

Replaced my lower centre console for one that has no cut out for an arm rest. It been on my to do list for almost a decade!!
Before:

After:

 

[Yellow fr]

Replaced my lower centre console for one that has no cut out for an arm rest. It been on my to do list for almost a decade!!
Before:
View attachment 7807
After:
View attachment 7808

Have you still got that lower center console as I will be putting a arm rest in my and it will safe me have to cut that part out ?


Sent from my iPhone using Tapatalk

 

[g60stu]

Have you still got that lower center console as I will be putting a arm rest in my and it will safe me have to cut that part out ?


Sent from my iPhone using Tapatalk

I do still have it but not sure whether I will sell it because I also have all the armrest bits too and would probably sell as a whole if I did.

 

[Fozzy84]

Got my reducer from creation motorsport for the RamAir oversized filter to fit into the MAF. Next to do is relocate the battery to the boot and section off the corner to keep the air cool

 

[Leon20vt4]

Got my reducer from creation motorsport for the RamAir oversized filter to fit into the MAF. Next to do is relocate the battery to the boot and section off the corner to keep the air cool

Is that the SFS 70mm oversized TIP?

 

[Fozzy84]

It’s the Badger 5 Tip, bought from Awesome GTI

 

[Yellow fr]

Just getting stuff out to give mine and the wife’s car a clean inside and out


Sent from my iPhone using Tapatalk

 

[iammooks]

It’s ok sometimes I can’t get out off work mode when looking at cars

Sent from my iPhone using Tapatalk

No, I really appreciate it. I can do most of the simple fixes on the car, but I don't have the kind of experience that means I can look at it and say 'hmm - that doesn't look right'. It saves a lot of money when you can sort something early on, rather than only finding out when the alternator explodes or something that I could have solved it six months ago by tightening a screw or something simple like that.

 

[Legojon]

Just getting stuff out to give mine and the wife’s car a clean inside and out

Keep up the good work!!

 

[Yellow fr]

Keep up the good work!!

Well washed the wife’s car in the sun and washed mine in the rain grr it always rains when I wash the wife’s car grr and now the sun has come back out


Sent from my iPhone using Tapatalk

 

[Legojon]

Well washed the wife’s car in the sun and washed mine in the rain grr it always rains when I wash the wife’s car grr and now the sun has come back out

In my head you used 2 buckets with grit guards. Let's not spoil that.

 

[Yellow fr]

Jet wash and snow foam what’s a bucket and grit guard I washed them at home not at work


Sent from my iPhone using Tapatalk

 

[Legojon]

what’s a bucket and grit guard

I don't understand the question.

 

[Yellow fr]

I don't understand the question.

Lol


Sent from my iPhone using Tapatalk

 

[bruceR]

Computer says “no!”


Sent from my iPhone using Tapatalk

 

[Leon20vt4]

Had a conversation with a tuning company in Greece. Finding out more details on their stage 2+ tuning! They utilize the NA camshaft for inlet valves. They also can tune for e85 and methanol! I'm excited! Great numbers!

K03s cars 180hp

265hp
303 tq