-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Phillc's Mk1 Cupra...
- Thread starter Phillc
- Start date
300bhp/310lbft yea?
wonder if it is here
If your dyno is working correctly, then yes
brad1
Guest
i hope for phils sake he makes more than that as i made a max of 285bhp and 305ftlb on bills rollers. good luck phil and i hope you get great results as you deserve it for all your hard work
If your dyno is working correctly, then yes
it would be an interesting comparison then would'nt it.
I know mine reads, sensible & accurately, and not "happily"
I dont know just waiting for Will to email the logs over, its still dipping the power near the top end as you said when i came down the throttle is shutting slightly, i am going to get a new maff as Will suggested it is probably that causing the problem.
Well i have been busy this last week I have bought a few bits and bobs;
New Clutch
LCR rear calipers and discs.
Polly bushes for the wishbones
Weitec Hi Con GT Coilovers
new hand brake cables
I have re furbed the calipers with new seals and paint, i also had the clutch pedal issue so had that welded and bought the new clips, PITA but only cost me £3 so not the end of the world, so now my list of things to get done is getting longer and longer.
Fit front and rear polly bushes
Fit rear calipers and discs
Fit new suspension
Fit new steering rack (LCR)
Fit new Clutch
Fit new hand brake cables
Oh and i am getting her re-spayed in the next month or so, so have been stocking up on seals and bits of trim. i am going for a full glass out, doors, bumpers, sills bonnet and tailgate off and all the door shuts being done aswell.. cant wait, then its the engines turn head and bottom end.
New Clutch
LCR rear calipers and discs.
Polly bushes for the wishbones
Weitec Hi Con GT Coilovers
new hand brake cables
I have re furbed the calipers with new seals and paint, i also had the clutch pedal issue so had that welded and bought the new clips, PITA but only cost me £3 so not the end of the world, so now my list of things to get done is getting longer and longer.
Fit front and rear polly bushes
Fit rear calipers and discs
Fit new suspension
Fit new steering rack (LCR)
Fit new Clutch
Fit new hand brake cables
Oh and i am getting her re-spayed in the next month or so, so have been stocking up on seals and bits of trim. i am going for a full glass out, doors, bumpers, sills bonnet and tailgate off and all the door shuts being done aswell.. cant wait, then its the engines turn head and bottom end.
Feck me Phill, that's a fair list and expense.
I take it your sticking with yellow?
Are you taking Bill up on his RR offer?
I take it your sticking with yellow?
Are you taking Bill up on his RR offer?
red.r300
Guest
those wheels look the nuts . what are they? also does anyone know if the rs8 wheels will fit a 2003 leon cupra r? thanks
Phill i have a plan!
I also have shite loads to fit and if i ask we should be able to do at my work
Do your rear beam off rebush, fit rear coilies then while you fit LCR calipers i can rebush your wishbones in poly
Then do my rear beam bushes, and handy press and flame throwing torch for stubborn bits
I also have your axle stands and perfectly sized wood
I also have shite loads to fit and if i ask we should be able to do at my work
Do your rear beam off rebush, fit rear coilies then while you fit LCR calipers i can rebush your wishbones in poly
Then do my rear beam bushes, and handy press and flame throwing torch for stubborn bits
I also have your axle stands and perfectly sized wood
Similar threads
