Okay cheers.
I’ll have a look.
If they’re for a LH drive car I’m sure someone abroad can make use of them.
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
I’ll have a look.
If they’re for a LH drive car I’m sure someone abroad can make use of them.
They're left hand drive sorry
Just realised my car is in pieces in the garage. Here are the RHD parts:
Cheers Stu, yes I also found a another pair of headlights up in the loft too. Good used ones and they have the same numbers as yours.
So anyone in Europe with a mk1 Leon needing a pair of new headlights?
Like a lottery win I also found a new original front splitter still in its bag I must have bought years ago and forgot about.
Missus thought I’d found a suitcase full of gold I was that excited. Look of disappointment when I told her what I’d found.
Also, don’t know if anyone is into models?
I am offering for sale an ultra ultra rare mk1 Cupra R 1.43 scale in red made by neo.
These are unbelievably detailed resin models near impossible to find.
Think they were made in 2009 and they did red, yellow, silver and black ( with red interior strangely).
Only reason I’m selling this one is I have one of each already. Found the silver one last year after years and years of searching and paid over £100 for it.
I had two red ones as I was going to strip one down and paint it platinum grey but it would be impossible due to the delicate detailing.
So offering it to all you mk1 fans first before putting it out there.
Model is mint, Perspex box is cracked on one corner.
Here’s my little shelf of mk1’s so you can see the size of these compared to the big red and yellow Otto models.
PM me if interested.
I am offering for sale an ultra ultra rare mk1 Cupra R 1.43 scale in red made by neo.
These are unbelievably detailed resin models near impossible to find.
Think they were made in 2009 and they did red, yellow, silver and black ( with red interior strangely).
Only reason I’m selling this one is I have one of each already. Found the silver one last year after years and years of searching and paid over £100 for it.
I had two red ones as I was going to strip one down and paint it platinum grey but it would be impossible due to the delicate detailing.
So offering it to all you mk1 fans first before putting it out there.
Model is mint, Perspex box is cracked on one corner.
Here’s my little shelf of mk1’s so you can see the size of these compared to the big red and yellow Otto models.
PM me if interested.
Nice collection, I've been trying to find an Otto one that doesn't involve selling a limb. 
Sent from my SM-S906B using Tapatalk
Sent from my SM-S906B using Tapatalk
Nice collection, I've been trying to find an Otto one that doesn't involve selling a limb.
Sent from my SM-S906B using Tapatalk
Yeah they ain’t cheap.I also think the wheels on the Otto models look more like 17’s like on the FR+
rather than the 18’s. That’s me being a bit picky though. Lol
I even removed the bonnet lock and cleaned it up. My god they get filthy!
I filled up the coolant and ran the car up to temperature. It took an age to get the lower radiator coolant pipe to get warm. All seems good though.
next step is to get the a/c guy round to gas the system. Then I’ll stick the bumper and lights back on.
nice that , I've got a Norev Renault 5 GT turbo same scale as that you can open the doors,boot ect amazing detail they are hard to get know or there expensive,
Recently acquired an LC so have been checking loads of stuff the last couple of weeks.
Today I had the Cupra sideskirts off for a good clean and checkout sill condition - squished pinch welds to address.
Yesterday checked out the rear washer joint in boot. All good and someone had tapednit in the past.
Today I had the Cupra sideskirts off for a good clean and checkout sill condition - squished pinch welds to address.
Yesterday checked out the rear washer joint in boot. All good and someone had tapednit in the past.
Yes. Bonnet lock is quite straight forward. Two torx screws to remove the cover plate, then you can release the cable which is quite fiddly because it’s covered in filth and a bit blind. Then another torx screw and it’ll pop out. And one electrical connector.Nice one m8! Awesome job, a labour of love for sure
Out of interest, was the bonnet lock removal straight forward? Mine is in desperate need of attention...along with the endless list of other jobs I'll one day tick off
To get the bonnet lock off does the grill or bumper need to come off? I tried getting the grill off it’s solid in places
The bonnet latch can be accessed by removing the centre grille only if required.
Sent from my SM-S906B using Tapatalk
Sent from my SM-S906B using Tapatalk
More little bits done today.
Replaced an old knackered disc brake screw with a new torx one.
Replaced all the metal clips on the inner arch liners. This has been in the cards for several years!!
Cleaned brembos and front wheels.
Replaced an old knackered disc brake screw with a new torx one.
Replaced all the metal clips on the inner arch liners. This has been in the cards for several years!!
Cleaned brembos and front wheels.
I’ve tried to get that off bloody solid unless it’s fixed at the back
Sorry mate, someone bought it this morning.
Could have sold it a few times over to be honest.
In my favourite colour too. Someone's gong to bite your arm off at that price.
Girlfriend wants me to get an A5 - and the diesel gives her enough car sickness as it is, so don't think I'd be able to get that by her.
If you've still got it this time next month...
Sent from my iPhone using Tapatalk
Similar threads
