maf

Lol, joking... Think I am officially a "proper" cupra owner now. Since Friday I've put in new spark plugs, and 4 new coil packs and now I think my MAF has gone! Typical! Friday I said "I haven't had a Coil Pack go yet!" Famous last words. Today, I had an A3 behind me, let him pass, then went...

Just got a couple of questions to clarify some points. When i start my car from cold on my LCR the revs go to about 1300 rpm and take roughly a minute to die down to normal speed. First of all, from what i can gather your car is supposed to rev higher due to auto choke on start up but should...

Hi Any suggestions on best price & place to get a genuine Bosch replacement MAF sensor for my ibiza cupra TDI? Have dealt with VAGparts.com in the past but obviously they aren't about anymore, have also used AVS spares. Any suggestions welcome cheers Dave:think:

Hi! I have a remapped LCR with a BMC CDA sp12 induction. The car made 242hp on the RR and I can see from my logs that the MAF read 193 g/sec MAX. So the 242hp and 193 g/sec seems equal enough, but, it boosts around 1,5 bar. Could my BMC CDA be the limiter here? or may'be the standard TIP...

I need some help guy's. I had a split hose a few days ago which caused a boost leak :( It was the hose between the top of the charge pipe and the N75, The pipe has now been replaced with some reinforced forge hoseing of the same diameter. Right the new problem I have is this; We went...

Hi was on way to work this morning when suddenly car started back fire and not running correct so i have come home on break plugged into vag com (not full version) and it only coming up with 16486 - Mass Air Flow Sensor (G70): Signal too Low P0102 - 35-00 - - now i know it need one of...

Hi guys, needing these two items to complete my 290bhp conversion. Can anyone tell me part numbers or best place to go to get them. Also, is all i need the MAF housing or the sensor too? Thanks Walshy ps i have done a search and have had no luck

Morning peeps, I've been playing around with VAG-Com over past few days recording power runs with different air filters to find which performs the the best and I have come across a bizarre reading which is appearing regardless of which filter I have setup when logging block 003 on the Mass...

Can any one tell me which one of these MAF Sensors is correct. They both have the same part number stamped on them. The top one is the standard Bosch Sensor and looks the same as my old sensor. The bottom one is a after market one but it has the wire on the out side. Are the the...

hi just found a good deal for a maf sensor on ebay just not sure if its the right one for my ibiza cupra heres the link...

:cry: Ok... So I have an engine with a problem :headhurt: The story: I have never had one problem with the Cupra since ownership in aug '08 Last night was driving for a good 30 minutes at a steady 50-60mph, the car was fine the whole journey. Within coming close to destination, I...

I think my MAF sensor has packed up. I'm going to disconnect it on Wednesday and test it but for now i'd like to order a replacement part. So i'd like to know if the MAF sensor is common across the Leon range? If not, I have a LCR so does anyone know the part number? Where is the cheapest place...

how much should i be paying for new maf sensor or should i just go to a scrappy and do it myself?

Just checked my Maf readings at idle on my scangauge it reads between 13.2 and 13.8 does this sound correct?

Please dont gun me down! I HAVE really searched for almost an hour now and cant find the bloody part number for a replacement MAF for my MK1 Leon Fr tdi :censored: Can anyone help please? :(

Afternoon guys Ok so after cleaning up the exisiting MAF with isopropyl alcohol and having moderate success I am going to bite the bullet and buy a new one. Could anyone suggest where to get OEM bosch one for the 110 ASV engine - best price and if possible non-exchange. cheers :D

Hi i have a 51 plate cupra, i have had trouble with poor running and misfires. i have had a rac diagnostic on it and it came up with wis fire on all cylinders and running lean. i have replaced all plugs and coil pack but still not right. the fualt codes coming up now are - 17704 - no info...

Hi every1, dont wanna soumd dull but where is the MAF Sensor on a 2001 LC? Also, does any1 know if a LCR backbox will fit this car? I have a LCR rear bumper and when i put it on my car the otherday the exhaust was touching it. Jus wondering so i know wat backbox to look for. Thanx, Ian

Heres two pics: Is my car still driveable? How can i fix it? I was pushing on my induction kit as it was a tight fit and the part you see in the pic snapped! I really don't know what to do... paniced a bit lol Any help would be very much appreciated! Thanks, Ross

I have a terrible flat spot on one of my cupra R's - I've tried all sorts to fix it but am at my wits end! so far i've had the following done but to no avail: New Boost Controller Sensor, New Mass Air Flow Meter, New Platinum Plugs, also had it remapped to see if that would cure it...