maf

Well my MAF has been playing up recently and the car keeps going into limp mode (very annoying and for some reason it only does this on the motorway!! Anyone any ideas why!!??). When Vag-commed it came up with a maf signal too low and engine running lean. The question is where can i get a...

just done some logs on my cupra how do i instert them to the website i need an opinion on if it all looks ok. pm me somone and ill get them up

Does anyone know off hand the bore size of silicone i need to join onto the MAF on the 20vt? i think its 70mm?

What figures should it be reading? Found the LCR versions but not the LC

Could anyone tell me where the maf sensor is located on a mk2 arosa sport please? Thanks

Strange MAF issue.. Graphing the MAF on my 130bhp remapped Ibiza Please see the attached link. Im trying to get to grips with whats going on here.. The maf actual graph seems to be working ok however the maf specified just stays at 850. Any other guides I can find to this problem show a good...

Just done a MAF log while driving round my estate, at 5400 revs the mass air was 150.81 does this sound about right? Can post the log if anyone wants to see it

Hi all, Maybe a silly question but here goes: Is it right that the 1.4 seat leon mk1 does not have a MAF sensor??

can i fit a 3" maf to my 180 leon cupra directly or do i need to change my ths tip and induction kit to a lcr one? thanks v much!!

Where can i get a tool for removing the maf sensor from the mousing?I have a set of security bits but they are all six sided and the maf screws are five sided.I dont want to damage the screws so i want the proper tool rather than a bodge

hey all, went out and did a few runs in the lcr jabba map, logging mass flow rates as i have modified the cold air feed to my bmc-cda and cut some plastic away in the maf resulting in these results. ive edited out out any idle measurements so you see whats happening under load. checked the car...

Skahigh and I put vag com on the car last night, as its been acting strange recently When planting it, it seems to fluctuate, and the power delivery is no longer smooth. My logs were peaking at 185 g/s But his logs were up in the 200's which made us think the MAF may need replacing...

Just a quick question. Could anyone tell me the diameter of the standard Ibiza MAF? Wanting to know so I can buy a abit of Samco for it.. Cheers :)

Right please bear with me as i'm totally new to all this, not even got an Ibiza Cupra yet but looked at one onthe weekend. The guy told me the engine management light always stays on when starting the car up each time and will stay on for the duration of the drive unless over 200 miles so...

Hiya everyone, for MAF cleaning ive read the best product to use is Isopropyl alcohol. however im going away tomorrow to a friends for a long weekend which involves a 3 hour drive, meaning that the alcohol wont arrive from maplins in time. so i was wondering if there are other products...

I'm on the lookout for a new MAF, so I thought I'd try good old ebay to see if genuine parts were cheaper than the dealers and I found this...

Had a search but didn't find any specific references that helped. Does anyone know what tool you need to undo the screws that hold the MAF element in the housing? I need to remove mine to refit it into a LCR 3" housing but all the tamper-proof and torx heads we've tried don't fit properly...

Im goin to claen my maf out but i cant find what size the security torx is i have a full set but not one that fits is it a special or one of size?

After doing some logs on my ahu i was getting a bit worried that my MAF was very bad and not working well at all. But after a bit of research on tdiclub.com and other places i have found out that anyone with the old style pierburg TDi MAF like this one pictured here. Part number 974906461...

Car is on 48000, and 4 years old, so I got a new MAF and also a fuel filter at the same time. The car was on the originals. Despite having a dealer service history they never thought it prudent to change the Fuel filter! Even though it says to do it every 2 years! I felt the car didnt pull like...