maf

Do MAF sensors arrive faulty at all? I ordered a new sensor from GSF, fitted it tonight and the car misfired and cut out :cry: It is the right part as the part number matches the previous one.

Did some logs the other day as i had a maf error code and got a new air filter, but the error code hasnt come back. Logs done from 3rd to 5th 31 January 2010 17:53:13 1ML 906 032 1.8l R4/5VT 0001 Group A: '002 Group B: '020...

VagCom MAF readings from my car today... Just want to know if there are any problems here and if you can tell if its been mapped here. My cable keeps preventing me from running full software so these are the only logs i seem to be able to get. Wednesday 3 February 2010 18:24:45 1ML 906...

hi all, ive just started to fit my p-flo kit to my AUQ cupra, im no mechanic and have been looking forward to fitting this, trouble is ive just encountered a small problem when trying to remoe the MAF, it seems to be held in place by 2 'screws' but i have never seen a head like them before! they...

What size is the standard maf housing on a cupra (180)? As i need to get some silicone hoses for my induction

Been pricing up a new MAF for my LCR. Looked on euro car parts...£86.65 here Then thought id have a quick look on ebay....£169.58!!! here Why is there such a difference in price? It is exactly the same part right????

Where's the best place to buy one of these? I have looked on the net and seen various different prices, want to make sure i get the right one and just wondering what kind of price i should be paying for one. Car is a 2001 Leon Cupra. TIA

As above any one else had this problem or herd of it? traction control light is permantly on! In my case its on a lcr if that helps. thankyou.

May 55plate Altea has recently lost power. I've disconnected the MAF, which made no difference so i suspect the MAF is shot. no faults listed from VAG-com. I've started doing some logs, but all posts on checking the MAF point towards plotting Actual vs Specified, mg/str in VC scope. The...

Hi all. Had a search through old posts but can't find what I need specifically although it's cleared a coupled of things up (bless you Search tab!). The local motor factors offer either reconditioned Bosch units or from what I can see another brand called PVW which is new. Bosch is a good...

i couldnt have the moving test as i dont have a laptop, just an extended usb which does the runway to run diagnostics from my desktop, so these results are done in neutral so probably not a good way to test but anyways..... this was the readinga as it idled against the maf vs lamda

Hi all, I'm after some silicone pipe for my intake and can't remember what size the maf connector is (and can't be bothered going outside to check!)...any help please!?

Can anyone advise what sort of MAF g/s reading I should expect on my LCR 225? I was thinking of 169 g/s going on conversion of 222bhp / 1.31. The only mod is a K&N 57i cone filter. I will try and post log later. I assume 003 and 020 groups would be ok for this. (I don't have full...

I think my maff sensor is goosed its gone from getting great readings to reading that are all over the place :cry: ,have a look and see what you all think, car just doesnt feel good 1st time i have drove it all week, the maff has been on since the car was made Saturday 21 November 2009...

Hey guys Went down to Performance Torque today to have stage 1 done, all fine and dandy but will mentioned that my MAF wasn't running right He said when he unplugged it, it ran more power but lacked the torque. Ran VAG com on it and said it was running less than what the MAF should be, if...

I have fitted a new MAF after the car was running rough (plus done over 70k now), but since fitting the car seems to be boosting a bit strange. It is smoother now but seems to bog down around 2000rpm in most gears, like bad turbo lag, and seems slower. There were no other problems before...

anyone here logged their actual MAF voltage output..? its a 5v sensor signal by design, and from assorted data I have seen for some bosch MAF's they have different characteristics of voltage to airflow, with nearly none of my data showing a MAF sensor airflow max being 5v.. 4.77v seemed a...

Hi all Just wondering if the airbox with the 3" MAF off a Cupr R will fit the leon TDi (PD150). Im after a new airbox setup to replace my Carbonio and cant remember the size of the old equipment. Cheers in advance

Hey there, Where is the best place to get a maf sensor from for my LCR? I've seen some non-genuine ones for a third of the price of OE ones. Are these any good or will they create more problems? Cheers Ben

I have had a few errors when scanning vag-com through my ibiza cupra mk3. The maf signal being too low and engine running too lean. I have now ordered a new MAF from seat and that should arrive in stock today (hopefully). I was reading through another thread and it suggested some logs to...