logs

Since having my LCR remapped ive been loving the extra power and like a kid with a new toy i take every opportunity to give it a blast that was up until Wednesday evening whilst coming back from the petrol stsation I put my foot down for a bit of dual carriage way fun and whilst you could here...

Just thought i would put up some info on my car and some pics and try keep it updated when i do more things to see what you all think. Heres the car as it stands and what else i want to do. Engine: AM04 stage 2 turbo with Eurospec sports actuator Greentop 440cc injectors THS high flow...

I've got a stage 1 p-torqu map on my mk4 IC and me & DPJ have done some loge early on today. I'd just like some comments on them from people please, just to check everything is running ok :) MAF Boost Intake temp Thanks Damien

ive just got my cable and thought i would do some logs but i only got time to do one log from each channel (115 and 118) 115: Wednesday,30,January,2008,15:42:07 6K0 906 032 ,1.8L R4/20VT SEA 0002, Group A:,'115, Group B:, Not Running, Group C:, Not Running RPM,Load,Absolute Pres,Absolute...

last night i went to the herts and kent meet (great meet by the way) and thanks to james and craig i managed to get some logs done :) the out side temps were 11 degrees when the logs were done. Saturday 26 January 2008 18:15:54 6K0 906 032 1.8L R4/20VT SEA 0002 Group A: '118...

Hi all, I have been experiencing a loss in economy recently, and my engine has been sounding more "throaty". Some people have pointed out it could be the MAF. I drove the car with the MAF disconected for a day or two, severe power drop but a lot smoother, and better MPG. I managed to...

17535 P1127 Long Term Fuel Trim mult.,Bank1 System too Rich car goes into limp mode, then after a few hours driving or so it will give me boost back but EML will stay on... read the code and only fault code that came up was 17535 as above ? So any idea's guys, had it dioged earlier aswell and...

Hey Guys Just need your help understanding these logs. I've been told i have a boost leak which is causing my overfuelling problem, so have done some logs and could anyone tell me if it looks like i do. The car won't rev past 3,500 rpm when on full throttle, not sure if the logs will make...

Just been out in the car and had the laptop in the back so decided to do the blocks i could remember off the top of my head without looking... does it look a healthy Cupra...i think they look ok but is the maf low. Ran out of track so didnt quite get to redline. Group A: '002 Group B: '118...

Replaced the temp sensor and done some logs to see any different. Am i running rich or lean? :confused: Monday 24 December 2007 17:45:36 06A 906 032 T 1.8L R4/5VT 0003 Group A: '003 Group B: '020 Idle speed Air mass in Throt Angle Ignit Angle Idle...

Right carryin on from my thread : http://www.seatcupra.net/forums/showthread.php?t=147840&page=2 I kinda need some advice as i dont now what im lookin at...Basically i have no boost at all and when it does deside to work it will work till 3.1krpm then just cuts out.. Ive done all the check...

Managed to get out tonight for abit of decent logging after the car being off the road for 6 weeks :( Id just like other opinions really. I was expecting abit better airflow now ive gone to a open cone rather than a modded box,but only pulled 174g/s with the OC compared to 172g/s on the modded...

Taught i done some power runs to see whats the car running as it abit cooler outside, since the last time i done it in the summer few months ago. The temp outside was 10 degress 3rgd gear run some didnt feel right when i was doing, as the turbo just felt abit dying out, plus is my...

Just got Vagcom working so had a go at logging the airflow as my MAF is playing up. This log shows it peaking at 150g/s which ok yeah? Group A: '002 RPM Load Inj. Mass Flow TIME STAMP /min % ms g/s 0.39 2520 66.9 7.79 32.47 1.59 2760 147.4 17.63 85.25 2.79 3080 182 21.73...

Hey all, Just did some logging, first time actually:funk:, i did all the logs in 3rd gear from about 1500 to 2000 rpm up to as close as i could to red line as i read from previous posts. The problem is, i have not idea what they really mean:think:.Could someone out there that knows what they...

Can someone post up a 115 log please, or even check whats the most mbar its requesting, ideally on Boost 9 or HB9 for old school SPS people. Thanks.

Made a few adjusments to the wastegate and the timing via lemmiwinks over the last week and managed to get out over the weekend to do some logs. To me the Maf is fine and the timing looks like its pretty much at its safest maximum peak? Im not to sure about the requsted vs actual though as i...

Had my Revo settings adjusted to HB9 T9 at the weekend, managed to get out late last night to do some logging. My previous logs on HB9 T7 looked great just want to make sure everything is still running ok now the settings have been adjusted. All comments welcome. Running K03s with all the...

Last week my battery went dead... I bought a bosch silver, hook my vag-com, cleared all dtc's, i did a TBA and went for a log (my 1st ever!!) Specs:K&N panel filter(no oil),Full 63.5 exhaust with racing cat and 2 silencers,Custom FMIC with S3 style piping,Custom Map,Forge DV006,N249...

Wnet out on my first datalogging session last night with my own laptop, Had a nice open road for a good hour and managed to get what i think was some good logs. Could sombody in the know report back on my logs to tell me if its safe to max out my settings with the SPS3. My car is a seat ibiza...