logs

Measuring Block 002 RPM Load Inj. On Time Mass Flow TIME STAMP /min % ms g/s 0.91 760 19.5 1.7 2.69 73.92 960 43.6 5.1 10.92 75.14 1080 72.2 6.46 15.94 76.45 1280 79.7 7.14 20.5 77.65 1520 80.5 7.48 23.86 78.96...

My car overboosts.It is a year 2000. 1.8t remapped..standard ko3 turbo Tried different N75 valves, checked all vacuum hoses... MAF is new. Here are some logs ,Group A:,'115,,,,Group B:,'118,,,,Group C:, Not Running ,,RPM,Load,Absolute Pres.,Absolute Pres.,,RPM,Temperature,Load,Absolute...

With the help of Ben (boomhauer) earlier, we managed to get some logs for my car (and hopefully an insight into why its not running properly) logged blocks 002, 003, 006 and 020 Group A: '020 Group B: '002 Idle St Idle St Idle St Idle St RPM Load Inj. On Time Mass Flow TIME...

I bought this less than 24hrs ago and i love it....I really do... I just Intend to do a full APR Stage 2 and Leave it be,i don't intend to lower it but today ive fitted * 6000k H.I.Ds * Forge 007p Dump vavle And the bits i have to fit are a * Huge Jetex Filter * forge T.i.p...

did so log on the car to night hade some problems with my ecu have a new one comeing. when i got the car he sad it was stage one from a tuner in norway but i found out that it was a mark on top off my fpr and may wastegate was turned to 22 treads[:@]found out on here that 13 threads was right...

As above really, I'm not sure if my map is requesting the correct boost and would like to compare logs, preferably 003 & 020, 115 & 031 and 118 & 032. Thanks in advance.

Hi all, Was wondering if someone could have a look over my logs pls. Ran out of road before i got to the limiter tho! Car doesn't seem to be having any probs but would just like to know if the maf is ok etc for peace of mind if you know what i mean! First part of the log isn't full throttle just...

I'm considering getting one of these, the price is'nt bad and the blue will compliment my engine bay. Any thoughts, advice, pictures would be appreciated.

Hi all just downloaded the share ware version of vag com so can only log to block 023 but thought i would ave a go any way and log 003,004 to see what maf reading and intake temps were like all comments welcome also would any other logs to 023 help Group A: '003 RPM Mass Flow Load...

Car been serviced,ECU reset TB alignment etc,how do the logs look Wednesday 4 November 2009 19:40:27 06A 906 032 MJ 1.8L R4/5VT 0003 Group A: '003 Group B: '020 Engine Speed Intake Air Mass Throttle Drive Ignition Cylinder 1 Ignition Cylinder 2...

Just run these 3rd gear logs as its a trail to get to a road long enough to do a 4th gear power run,what's your opinions of these cheers Monday 26 October 2009 18:58:35 06A 906 032 MJ 1.8L R4/5VT 0003 Group A: '003 Group B: '020 Group C...

I have had a few errors when scanning vag-com through my ibiza cupra mk3. The maf signal being too low and engine running too lean. I have now ordered a new MAF from seat and that should arrive in stock today (hopefully). I was reading through another thread and it suggested some logs to...

hi Last night had a little RR evening at local place in Slough called Novatech. The results seemed reasonable accurate as a few cars that had been RR'd before produced very similar results. Just wondering why i would be down on standard figures by so much( 15hp and 30 ft/lb down) ? And...

Have I done it correctly it's my first go at this? Did blocks 110-119 Friday,16,October,2009,13:58:45:23711 VCDS Version: Release 908.0 Data version: 20090911 --------------------------------------------------------------------------------...

Was a VAG open day @ GotBoost on sunday, myself and 3 ibizas ran, so a good comparison. My logs.... First run +3° timing via lemmiwinks... Sunday 11 October 2009 14:08:35 6K0 906 032 AA 1.8L 20VT EU3 02 0002 Group A: '002 Group B: '020...

just done some logs on my cupra how do i instert them to the website i need an opinion on if it all looks ok. pm me somone and ill get them up

Group A: '003 Engine Speed Intake Air Mass Throttle Drive Ignition TIME Angle Sensor 1 Timing Angle Marker STAMP /min g/s % °BTDC 0.01 2760 58.53 65.1 24 0.9 3120 104.08 100 4.5 1.81 3600 121.64 100 6.8 2.71 4080 139.17 100 9.8 3.62 4520 147.64 100 8.3 4.52 4960 164.47...

VAG-COM Version: Release 409.1-S Chassis Type: 6K - Seat Ibiza Scan: 01,02,03,08,15,17,25,35,56 ------------------------------------------------------------------------------- Address 01: Engine Controller: 6K0 906 032 AA Component: 1.8L 20VT EU3 0002 Coding: 10500...

Got my car scanned today but not sure if these figures are healthy:confused:

This mk3 ibiza cupra - Mods amd stg1, catback exhaust, cai air filter, forge tip.. Group A: '003 Group B: '115 RPM Mass Flow Load Ign. Timing RPM Load Absolute Pres. Absolute Pres. TIME TIME MARKER STAMP /min g/s % °BTDC STAMP % Requested Actual 0.77 1800 29.5 100...