-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
well today I installed another timing belt kit and waterpump, this time from Febi, the same noise is still there so it clearly wasnt the Gates kit causing it, Ive took the aux belt off and the noise doesnt change so its deffo coming from the timing belt componants, very annoying, its bang on timing and drives perfectly, could it just be a bedding in thing with the new tensioner and roller? I havent done timing belts on these cars before so I dont know if this is normal. although I did find this and and in the comments the guy says its better after a few miles. its exactly the same noise mine makes with the Gates or Febi kit....
also wired in cruise control today and all works good
also wired in cruise control today and all works good
Couldn't that be a bearing on its way down?well today I installed another timing belt kit and waterpump, this time from Febi, the same noise is still there so it clearly wasnt the Gates kit causing it, Ive took the aux belt off and the noise doesnt change so its deffo coming from the timing belt componants, very annoying, its bang on timing and drives perfectly, could it just be a bedding in thing with the new tensioner and roller? I havent done timing belts on these cars before so I dont know if this is normal. although I did find this and and in the comments the guy says its better after a few miles. its exactly the same noise mine makes with the Gates or Febi kit....
also wired in cruise control today and all works good
its 2 brand new kits installed and both make the same noise all parts changed each time, tensioner, roller pulley, waterpump and belt, everything torqued to spec so I cant see how a bearing could be responsible in both kits unless ive been crazy unlucky lol
Maybe not a bearing from any of the kits tho, maybe something else
Sent from my iPhone using Tapatalk
I had a noise after a belt change because a coolant pipe that had been nudged was vibrating against another surface.
Cleaned out EGR and cooler pipe - not as bad as I was expecting but what a PITA for access, my hand and forearm are aching 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Cleaned out EGR and cooler pipe - not as bad as I was expecting but what a PITA for access, my hand and forearm are aching
Sent from my iPhone using Tapatalk
Yup, not a fun job, especially that stupid bolt underneath the EGR valve. Stupidly difficult to do
no thats a different setup to mine, mines the 1.8t 20v AUQ engine, it has the cam pulley, hydraulic tensioner with idler pulley attached, then it has a concentric pulley that helps keep belt tensioned with the hydraulic pulley, waterpump and the crank pulley, nothing else. Ive made a thread for this issue to save cluttering up this one, appreciative of any help.
Attachments
-
Exploded-view-distributieriem.png
Last edited:
Cleaned out EGR and cooler pipe - not as bad as I was expecting but what a PITA for access, my hand and forearm are aching
Sent from my iPhone using Tapatalk
Did you replace the o-ring?
Sent from my iPhone using Tapatalk
Yep, o-ring and both gaskets
Sent from my iPhone using Tapatalk
HOW MUCH...?!
Sent from my iPhone using Tapatalk
local TPS
Sent from my iPhone using Tapatalk
I ordered these three years ago. I still have all of them apart from the one I put in the car, so it must be working OK. If I'd known you were getting shafted, I'd have put some in the post for free!
Sent from my iPhone using Tapatalk
Finally have a confidence inspiring brake pedal (blockage in NSR caliper stopped it from bleeding properly). Also had a chance to check the bolt sover and see if anything had moved, all looking good atm
Turned the heads of a Porsche & Range Rover driver today as I whooshed by 
Made my day
Made my day
Last edited:
try ebayanyone breaking a cupra and have the drivers door inner handle and cable? my cable snapped today and in the process of trying to fix i snapped a tab off the but that the cable hooks onto
Similar threads
