Do you also have a model number of an upgrade card.
So I do not need a new v6 card ...
Should this upgrade card also be switched on by VW Central System?
(We now have a new fast MIB2 unit from 2016)
When I first got my car in 2015 - the dealer had put a 2012 card in to the unit.
The unit registers the first card inserted and that starts the process.
I demanded 2015 maps because it was a 2015 car.
They ordered a 2015 map card and it would not work
After a chat with SEAT technical - they were given a part number to upgrade the 2012 maps to the 2015 version.
The new version was V6 and the part number on the box is 5F0060884H
The card in the box carries part number 5F0919866K
The code comes in the box to activate it.
Instructions read :
1. start with the battery disconnected
2. ensure the navigation system card slots are empty
3. connect the battery
4. connect the SEAT diagnostic equipment
5. Start diagnostics and identify the vehicle correctly
6. Go to the special functions tab
7. Carry out the test SVM-activation
Follow the instructions on the screen ( this is where they need to insert the activation licence code from the new card )
8. Disconnect the diagnostic equipment
9. Switch off the navigation system
10. Dissconnect the battery for a minimum of 2 minutes
11. Re-connect the battery
12. Start the navigation system
13. Introduce the new navigation map card
14. Try the navigation system to ensure the new map update has been accepted