• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

iTB Ibiza Cupra 16v Track Toy - Engine Rebuild, Aero & More Page 73+

Dave_R

Save a Sheep...Buy Brembo
Sep 20, 2004
3,666
1
South Wales
Been a while,

Went to do Cadwell Park but had a few problems and had to cancel it, so booked Llandow which was today, nice to see a few faces from here!!!

Firstly I bought some wheel bags
C584B487-0736-43BE-9560-833246310BCA-1182-0000017E2000E965.jpg


Because it started raining first thing today I actually had a chance to fit my speedline comp 2's with Uniroyal Rain Sports
53FB68E5-1751-45A2-BC49-0B709A13D6EF-1182-0000017E19C45BE4.jpg


Really impressed with the amount of grip I had from these, the track seems grippy as most were commenting on so not sure if the grip I had was due to the tyres or track but I could throw it into the corners like I was in the dry.

Here's a load of photos from the day
3621.jpg

3620.jpg

3616.jpg

3612.jpg

368.jpg

36.jpg

364.jpg

362.jpg

3613.jpg
 

Dave_R

Save a Sheep...Buy Brembo
Sep 20, 2004
3,666
1
South Wales
Bill the grip out there I was throwing it about like it was dry!! Very grippy track in the wet!

I've Bilstein collies (non adjustable damper ones) Neuspeed 25mm front & 28mm rear.

James sadly the manifold as gone again this time I've found a hair thin crack on the first collector coming off the engine.


Sent from my iPhone using Tapatalk
 
Last edited:

Dave_R

Save a Sheep...Buy Brembo
Sep 20, 2004
3,666
1
South Wales
Been collecting a few parts for the list of work I've got for the winter months.

Going to relocate & replace my battery, few of you will remember my tiny battery I had a few years back. I replaced for a slightly bigger dry cell battery because my alarm was draining it too quick. I still have that smaller dry cell so going to relocate the battery from the rear of the car to behind the passenger seat.

I've had enough of disconnecting my battery all the time so going to fit an isolation switch
3A6CEEC6-5988-404A-8C26-A117E5126EFA-4856-000004F8F13BE331.jpg


Also having problems with my rear locking up under braking so going to fit a brake bias valve.
D095AFD7-1FC4-4E27-BBE2-52105B6D424E-4856-000004F8EB3DB164.jpg


Purchased two sets of aero bonnet catches, my current set on the car are going to be fitted to the boot lid because I've had enough of pulling the cable to open the boot lol.
D825B779-9A85-4C3A-AD18-01A4CE0A14A1-4856-000004F8E4EB7253.jpg


And these new set are going to be fitted to this
BB0FCCD5-314C-42AB-9BD3-8D71CB5E94C5-4856-000004F8F9A4BA47.jpg


DC923C8B-166E-4A28-9DCB-9593BF63BE4B-4856-000004F8FF7A7382.jpg


Fibre Glass bonnet, OEM bonnet weighs 12kgs this fibre glass one weighs just 2kgs.


Sent from my iPhone using Tapatalk
 
Bill the grip out there I was throwing it about like it was dry!! Very grippy track in the wet!

I've Bilstein collies (non adjustable damper ones) Neuspeed 25mm front & 28mm rear.

James sadly the manifold as gone again this time I've found a hair thin crack on the first collector coming off the engine.


Sent from my iPhone using Tapatalk

Ive got a set of eibach uprated spring brand new to suit bilstein coiles if your intrested
 
Last edited:

Dave_R

Save a Sheep...Buy Brembo
Sep 20, 2004
3,666
1
South Wales
Ive got a set of eibach uprated spring brand new to suit bilstein coiles if your intrested

Eibach makes springs to uprate Bilstein coilovers?? That's new to me, thanks for the offer but I'm happy with what I have.

Be honest the only photo I can see the car leaning is through the bus stop which is very tight in 3rd gear... Looking that the tyres the lean so from the wall of the tyre more than the car.


Sent from my iPhone using Tapatalk
 
Eibach makes springs to uprate Bilstein coilovers?? That's new to me, thanks for the offer but I'm happy with what I have.

Be honest the only photo I can see the car leaning is through the bus stop which is very tight in 3rd gear... Looking that the tyres the lean so from the wall of the tyre more than the car.


Sent from my iPhone using Tapatalk

Yeah they do i paid 280for all 4

60mm ID spring 10 inch long (to do away with the helper spring) 340lb rating (mine are 90lb spring plus 7lb for the helper standard) mine a damping adjustable and wanna get slightly shorter springs

Never fitted em but cant sell them for 80quid on e bay
 

Dave_R

Save a Sheep...Buy Brembo
Sep 20, 2004
3,666
1
South Wales
Well I didn't know that... Learn something new everyday, I have a think about it.

What did you order them for? Track use or just wanted to go stiffer.

How come you never fitted them? How much lower do you want to go? Mine are half way and think that's enough lol.


Sent from my iPhone using Tapatalk
 

Dave_R

Save a Sheep...Buy Brembo
Sep 20, 2004
3,666
1
South Wales
Engine braking for one & also dropping from 5th into 3rd too soon isn't going to be good for engine or gearbox!

Then blipping the throttle before changing into the lower gear keeps the car balanced and better for the gearbox to match the higher rev's before lifting the clutch.




Sent from my iPhone using Tapatalk
 

Dave_R

Save a Sheep...Buy Brembo
Sep 20, 2004
3,666
1
South Wales
You know I'll post photos up and to be honest I know the bodyshop I take my car to wont give it back to me until its right lol.... They know how fussy I am to


Sent from my iPhone using Tapatalk
 

Guppy

Guest
Looking good!

I can remember being out on track years ago with this around Combe when i was in my old Clio!

Great little car mate!
 
Lecatona HPFP (High-pressure Fuel Pump Upgrades)