-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
Something a little Different....
- Thread starter Dale!
- Start date
Well Christmas over and delay on recieving parts monty is coming home on Sunday, Hopefully be back on him in full swing....
I have purchesd a "new style" Tial 44mm external wastegate which are now "water cooled" I'm yet to decide if i'm going to plumb the water part in!!
I've had the manifold modified and a downpipe fabricated to suit here are a few fabrication pictures....
Anti roll bar without spacer blocks fitted
3 "bosses" fitted 1 for EGT, 1 for lambda and 1 for Wideband
Welds shot
All fabrication done by Bill @ Badger 5 - Top work...
Thats all for now
I have purchesd a "new style" Tial 44mm external wastegate which are now "water cooled" I'm yet to decide if i'm going to plumb the water part in!!
I've had the manifold modified and a downpipe fabricated to suit here are a few fabrication pictures....
Anti roll bar without spacer blocks fitted
3 "bosses" fitted 1 for EGT, 1 for lambda and 1 for Wideband
Welds shot
All fabrication done by Bill @ Badger 5 - Top work...
Thats all for now
It's alright I guess. You should have a word with my techie, he knows his stuff
Haha
You should come over mine when I was building this cupra for some right homo.... his name was Robbie C 
Last edited:
normally not a fan of these corsa but have to say this is really smart looking matey. hats off
Cheers
Very I'm pressibe mate , live this corsa . Well done
Thankyou
Quality write-up!
Had a soft spot for red-top Corsa's for a while now, theres just something about the rawness of them. Bet this things an absolute monster when you push on
Had a soft spot for red-top Corsa's for a while now, theres just something about the rawness of them. Bet this things an absolute monster when you push on
They are raw and pritty cheap tbh. Thats what started all of this.....
Well it has been known for leaving 11's places clarky_gtr
Guest
Alexlfc
Guest
Are you on the Pistonheads forum as well? I can remember seeing this before but can't remember where from haha
Lovely little motor,had a good look at it last saturday when i was down at Badger 5 for mapping on my Leon, Tony? was working on the car throughout the day while Bill and Tufftybloke were busy with mine
Tom
Tom
Cheers, yer Tony has done a spot on job! Seems weird being on the other side normally I'm there having a look around at cars lol! Can't wait to get it on the dyno at Bills and see what it makes this year!!!
Little Update:
Got a few bits through and managed to get some time in the garage tonight.
New twin 8" fans
Mounted on radiator, will be on the front now as now room at the back!
Radiator in place with fans
Then I started "mocking" the intercooler setup....
Passenger side from cooler to Inlet
Turbo to intercooler
Then I made a pikey intercooler mock
Rough sizes and where I'm upto so far
Cheers
Got a few bits through and managed to get some time in the garage tonight.
New twin 8" fans
Mounted on radiator, will be on the front now as now room at the back!
Radiator in place with fans
Then I started "mocking" the intercooler setup....
Passenger side from cooler to Inlet
Turbo to intercooler
Then I made a pikey intercooler mock
Rough sizes and where I'm upto so far
Cheers
Last edited:
Well been really lazy recently.... But hey ho onwards and upwards!
Intercooler has been ordered and is on design "C" now lol, should be here next week.
So time to crack on with the rest then! First off was to move Vinnie to my spare garage and get monty is the "gready" position!
Then it was time to get him up in the air to route new fuel setup.
Location of new areoquip FPR (excuse the tape )
List of parts for fuel system I need so far...
Currently half way through the mock fitment of the fuel system. Currently the setup below only shows return from rail to swirl pot and swirl pot to tank.
Through body connections
I will update with better pictures once all the fittings have been delivered.
Intercooler has been ordered and is on design "C" now lol, should be here next week.
So time to crack on with the rest then! First off was to move Vinnie to my spare garage and get monty is the "gready" position!
Then it was time to get him up in the air to route new fuel setup.
Location of new areoquip FPR (excuse the tape
)
List of parts for fuel system I need so far...
Currently half way through the mock fitment of the fuel system. Currently the setup below only shows return from rail to swirl pot and swirl pot to tank.
Through body connections
I will update with better pictures once all the fittings have been delivered.
Similar threads
