D.K's LCR, #Projectcarbon. Still alive

[jamiebennett81]

Just thought I'd try it mate

Ok cool, fair play

Personally I would keep the OEM and carbon look, if after logging the g/s airbox compared to what others log on open cone filters and there is not much difference or not enough to warrant a change then I would stick with the clean tidy look mate

Personally I think the look of a mushroom filter will really spoil the look of your bay mate....

 

[Murdered LCR]

That's why he needs the apexi

 

[jamiebennett81]

That's why he needs the apexi

So what's the difference in g/s between the air box and apexi? Direct comparison running same boost?

 

[D.K]

Carbon Fibre No plate blanks arrived today along with another big roll of carbon fibre, clear coat resin's and a few off cut's

Some of my work has aslo made it onto Carbon Mods website
http://www.carbonmods.co.uk/Products/Carbon-Fibre-Skinning-Starter-Kit---Large__CMCFSK1000.aspx

 

[D.K]

Milltek DP and sport's cat

Whilst at Inters last month I got to talking to the MD of Milltek exhaust's and we discussed the possibillity of makeing a 3" downpipe and sport's cat, They were very keen for this to happen and they will be useing my car to fabricate the system and do the relevent test

The car is booked in for the 23rd of August and I cant wait

I will try and get as much info as I can to post up on here

 

[Murdered LCR]

Sweet but they need to make the down pipe seperate to the cat so others can bolt a decat etc on it , personally I would go with pipe werx at 300 quid for down pipe and decat

 

[jamiebennett81]

Could you do CF sills Daz? I understand they have to be quite flat for the door to close properly or not to catch

Would the CF add too much bulk and catch?

 

[D.K]

Sweet but they need to make the down pipe seperate to the cat so others can bolt a decat etc on it , personally I would go with pipe werx at 300 quid for down pipe and decat

I'm pretty sure they will be separate patrs mate.

Could you do CF sills Daz? I understand they have to be quite flat for the door to close properly or not to catch

Would the CF add too much bulk and catch?

I'd have to see them mate, Might be better to do it in vinyl

 

[Damoegan]

Could you do CF sills Daz? I understand they have to be quite flat for the door to close properly or not to catch

Would the CF add too much bulk and catch?

 

[tyrer]

love the standard of your Carbon work mate, really top quality.

Been toying with the idea but will be a while before I attempt it.

 

[wayne lcr]

did you here any more of that guy on facebook daz?

 

[D.K]

did you here any more of that guy on facebook daz?

Which one mate ?

 

[D.K]

Front plate done

 

[wayne lcr]

him that offered you 20k

 

[D.K]

I had a quick look at it but I thinkl theres a lot more to it mate

 

[Murdered LCR]

20k to for what lol , plate looks good mate see those on the site quite dear tbh , you may get pulled tho

 

[wayne lcr]

still worth thinking about 20k nice little earner

 

[D.K]

20k to for what lol , plate looks good mate see those on the site quite dear tbh , you may get pulled tho

From what I read of it you have to designe something original and have it made.

As for the plate's, they dont acctually look any different to the OE one's, I even made them the same size and font so they should be Ok

 

[Cupra_R04]

are these plates reflective though?

 

[D.K]

are these plates reflective though?

Yep