Still talking via pm now...
I know when curzon had his Large pipe upgrade & A&M cooler his went so much better than with just laguna setup....
So going to get a LCR/TT charge pipe and do it like that
I know when curzon had his Large pipe upgrade & A&M cooler his went so much better than with just laguna setup....
So going to get a LCR/TT charge pipe and do it like that
Wouldn't bother with iridium plugs, I had IK22's but swapped to NGK BKR7E's .028" gapped, 7E's are one grade colder than standard, work great. IK22's are almost impossible to gap correctly due to the tiny tip which breaks very easily.
Backdraft had a couple of LCR charge pipe's for sale BTW.
Backdraft had a couple of LCR charge pipe's for sale BTW.
No idea m8, but I know it pulls over 180g/s though, scaled due to LC sensor in LCR housing it's around 210g/s. LCR charge pipe might be worth it, all I did was get some 2.5" pipes off ebay and create my own pipe run with silicone hoses and pipes. At the turbo end the LCR pipe is a funny size, around 67-70mm due to the daft silencer thingy.
Awesome Rob 
Do you have any pics of the charge pipe you made up and anyidea one what bends
Thanks
Do you have any pics of the charge pipe you made up and anyidea one what bends
Thanks
Only recent pics I have are:
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/nov001.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/nov002.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/nov003.jpg
I got the pipes from Pipewerx, look for them on eBay, if you ask them they'll weld beads on the ends of the pipes to prevent blow off.
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/nov001.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/nov002.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/nov003.jpg
I got the pipes from Pipewerx, look for them on eBay, if you ask them they'll weld beads on the ends of the pipes to prevent blow off.
Do you have any size ect that you sent them to make it up?as i could just get some made up...
Is that pipe work 3 pieces joined with silicone hoses..
also what inside diameter is that pipe work 63mm or 68mm?
as my mate wants to now so he can make me them up..
Is that pipe work 3 pieces joined with silicone hoses..
also what inside diameter is that pipe work 63mm or 68mm?
as my mate wants to now so he can make me them up..
63mm which is 2.5", 2 long-ish pipes you see there, down to a shorter 45 degree pipe in the wheelarch then round to the IC.
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/seminstall6.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/seminstall5.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/seminstall6.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/seminstall5.jpg
Muchos appreaicted rob its urs steel or alloy?i only have to do the outlet side of the turbo as its 55mm the Tb is 68mm..
really appreacite it rob
really appreacite it rob
Top two pipes are stainless steel due to not being able to find alloy pipes long enough, the rest are alloy. Hotside silicone hoses are all Samco Xtreme to handle the higher temps.
Ta rob
Did you measure it up your self? And order them or did you go some were to make it up...
Did you measure it up your self? And order them or did you go some were to make it up...
Not measured no, had to cut the back one but that was it, everything else went straight on, did it all myself.
never needed to gap my IK22's so why should you?
been fine for 2.7bar boost no misfire issues ever.
Because my car runs better on properly gapped NGK's - that's why. But it's your car m8, do what you like, what do I know.
Last edited:
jamiebennett81
Guest
Similar threads
