DaNnY_LaD's IHI'd Cupra ( End Of a Eara 08/11/2009)

[ChrisCurzon]

Mounted the Danny way i see
Is that not gunna get a bit warm with it being right over the turbo, when your trying to adjust it to set it up?

 

[DaNnY_LaD]

Its fine it aint going anywere as there a bracket just behind the mbc which holds it in black the ties are to keep it the correct way up...
I will Bolt it to my Strut brace when it isnt -5 outside so this will do lol

Right My engine consists so far

Atp Gt2x turbo
Atp 2.5 tip
Atp Manifold
3'' Downpipe & De-cat With Heat wrap.
2.5 milltek System Non Resonated
3'' Maf
Jetex Filter
440cc Injectors @ 4bar
Mocal Oil Cooler
Ecu/Map @ starperformance
TurboSmart MBC
N112,N249 & SAI Removal
EGR Removal
Oil Catch tank
Oil temp Gauge & Sender
Boost gauge
Vr6 helix Clutch & fiblanza lightend G60 Flywheel
Universal Intercooler With Uprated 68mm piperwork to turbo

i will be running 1.5bar aswell

Is the spec alright do you think?

Next would be:

4pots
Arbs
EBC
Tubular Mani..

 

[PhilW]

440's at 4bar?

 

[jamiebennett81]

440's at 4bar?

thats what I thought

aren't 225 ones sufficient, as this is what I run in mine

 

[p34ch3y]

Just a crash bar mod and just move tha a/c back abit...That one of beatties is 50mm

So im on the look out for a 40mm one..

is moveing the A/C back a hard job????

 

[caveo]

I'm only running 430cc's @ 3 bar

 

[cus]

is moveing the A/C back a hard job????

its only the a/c radiator that will need moving, which isn't too hard. i'm guessing it means drilling new holes and mounting it a bit further back

 

[p34ch3y]

its only the a/c radiator that will need moving, which isn't too hard. i'm guessing it means drilling new holes and mounting it a bit further back

just dnt know if it involved alot of pissin about like as this is something i may want to do

 

[PhilW]

Or is it 380's at 4bar which gives 440cc?

 

[DaNnY_LaD]

Or is it 380's at 4bar which gives 440cc?

Yeah phil there Lcr Injectors..I was told Lcr injectors With a 4bar was 440cc?

 

[DaNnY_LaD]

Maps All fitted Maf sensor fitted with filter..


Just need injectors now then i can finally drive it...

wish the postman would hurry up..

 

[ChrisCurzon]

Maps All fitted Maf sensor fitted with filter..

Thanks to Chris

 

[DaNnY_LaD]

Thanks to Chris

Thanks christopher

 

[ChrisCurzon]

Thanks christopher

No worries pal, sure you'll come in useful when im doing something on the teg

 

[DaNnY_LaD]

No worries pal, sure you'll come in useful when im doing something on the teg

Hahah GTF

I just need my injectors now...i have no idea were they are tho lo

 

[ChrisCurzon]

post man robed them

dodgy round your area

 

[DaNnY_LaD]

post man robed them

dodgy round your area

Shhh mate you have more torque than your Honda

My areas alright

 

[ChrisCurzon]

Shhh mate you have more torque than your Honda

My areas alright

My Teg's got plenty off torque, you'll see! Anyways when it comes to a corner we'll see whos laughing then!

Alright, if its not tied down its gone, its like the ghetto lol

 

[DaNnY_LaD]

My Teg's got plenty off torque, you'll see! Anyways when it comes to a corner we'll see whos laughing then!

Alright, if its not tied down its gone, its like the ghetto lol

Tied Down Dont you mean nailed down

I think my injectors came today but i wernt in so might have it all running tomorrow night

 

[ChrisCurzon]

Tied Down Dont you mean nailed down

Why is tying stuff down not sufficient enough, does it need to be nailed?