Non Cupra's

[nev]

blimey this thread goes fast!!!

the CDA kit looks good, and i know what you mean about increase in performance, but i have swapped in between filter and airbox quite a few times and not sure there is a real difference across the board. I think 2nd and 3rd seem to be better though

Chris, with the gear knob replacement, did you replace the gaiter as well?

PS: has anyone put cupra clocks in?

 

[Chris3boro]

blimey this thread goes fast!!!

the CDA kit looks good, and i know what you mean about increase in performance, but i have swapped in between filter and airbox quite a few times and not sure there is a real difference across the board. I think 2nd and 3rd seem to be better though

Chris, with the gear knob replacement, did you replace the gaiter as well?

PS: has anyone put cupra clocks in?

cheers. No same gaiter, just different gear knob. Really happy with it, looks better imo n feels lot nice and like I said it's not as tall as before so changing gear is more pleasant if that makes sense.

 

[Chris3boro]

hey fellow non cupra owners quick question, how's best to cut a gap in the lower rear bumper (the black plastic bit) to accommodate an exhaust? thanking youuu

 

[Mat]

My mate did mine. (coulda done it if i wanted, just couldn't be arsed).

Just get a hack saw and the smooth with sandpaper or similar.

I also used the cover on the other side covering tow eye as a template to make the cut out

 

[nev]

personally wouldnt use a hacksaw, as its not fast enough to give a nice cut. I watched the guy at an exhaust place do mine with basically a jigsaw by hand. Just mark up alot first and take your time i would say.

 

[Mat]

just thought, he used an electric drill thing actually! it was me who suggested the hacksaw that I saw lying on the garage floor

 

[Chris3boro]

lol alright cheers guys

 

[Adam R]

a hot knife will do the trick

 

[V15NEV]

grinder (cheap at B&Q-and will always come in handy in the future) then a good old sand and black polish (or red if you are colour coded)....

 

[M1KEH]

Hell no dont use a grinder thats way too agressive. Take your time with a dremel and a decent file.

 

[Gordz]

On the topic of induction kits just before.... what does anyone reckon to this?

http://cgi.ebay.co.uk/New-JDM-Cold-...ryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I currently have the k&n one fitted, but I really want an enclosed one, as my mate has one on his polo (same engine as our 1.4's) and gets much better results than me!

I know the induction kit i've put a link to up there is a cheap universal thing, but unless anyone knows anything else below say.. 60quid, then that's the sort of cheap crap i'd have to get? if it's worth it?

 

[nev]

does that actually come with a filter? the box and description might suggest otherwise

I like the idea of it though, comes so that you can adjust the pipe all the way along to suit an engine bay nice idea that.

 

[Chris3boro]

On the topic of induction kits just before.... what does anyone reckon to this?

http://cgi.ebay.co.uk/New-JDM-Cold-...ryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I currently have the k&n one fitted, but I really want an enclosed one, as my mate has one on his polo (same engine as our 1.4's) and gets much better results than me!

I know the induction kit i've put a link to up there is a cheap universal thing, but unless anyone knows anything else below say.. 60quid, then that's the sort of cheap crap i'd have to get? if it's worth it?

ultimately, u get what u pay for. I suggest holding out for something good second hand-i got my BMC CDA enclosed kit (widely regarded as one of the best kits around) in v good condition for £60 posted, imo far better than a new budget kit that's going to have little effect. Just my opinion ofcourse

 

[Ibiza125]

Get something better mate. I got offered a Pipercross viper kit for £35... The deal will appear from somewhere, ebay most likely. Remember, any kit will fit with the right pipe!

 

[Gordz]

Well i'm in no rush to get one immedietly, I can just wack on the old engine cover and save a bit of petrol in the mean time! ha!

Where did you get your enclosed kit from?

ultimately, u get what u pay for. I suggest holding out for something good second hand-i got my BMC CDA enclosed kit (widely regarded as one of the best kits around) in v good condition for £60 posted, imo far better than a new budget kit that's going to have little effect. Just my opinion ofcourse

 

[Gordz]

Also, i think some of the cupra lads do it, but has anyone tried or no if it's worth it, gutting out our engine cover / air box to improve the air flow and putting a decent filter in there?? Will that actually do anything???

 

[Chris3boro]

Where did you get your enclosed kit from?

I got mine from another member on here, but I suggest you wait and get a good kit for a good price. You wont gain anything with a cheap one, but will see gains with a good enclosed kit.

 

[Adam R]

Also, i think some of the cupra lads do it, but has anyone tried or no if it's worth it, gutting out our engine cover / air box to improve the air flow and putting a decent filter in there?? Will that actually do anything???

i was going to do that on my standard airbox. will let you knwo how it comes out

 

[Mat]

Just another heads up for all the Non-Cupra owners.

Have you seen the video of the rocket car at Santa Pod yesterday?
(for those who haven't, it's here)

If you're wondering what the secret is behind all that power. Well, it is - I shouldn't actually be telling anyone this as it's top secret - but the secret is...........


































It's my car with a shell over it

 

[Chris3boro]

lol at it setting off car alarms. Bet that was a great sight to see in person