Next it was time to do the Brembo's
As you can see they were in a bit of a state.
Started by picking off as much loss lacquire as poss, then sprayed them with Wolf's de-ironiser to dissolve as much brake dust as poss, this was left to soak for 15 min's then jet washed off. the jet wash peeled off even more lacquire.
The surface was then keyed using 120 grit wet & dry sand paper.
Masked up as much of the car as poss and sprayed them with smooth red Hammerite
We also painted the hubs of the disk's matt black
Unfortunatly we did'nt get time to fit the RARB,
Next up, Apply Brembo
stickers, freshen up the rear calipers and hubs and hopefully fit the RARB