Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
Its ok mate ill w8 for bill!

Ragged it "round a track" and it looks good. Ill do another one when its a bit warmer, was only 9c. Gear changes from 3-4th are stll very bad without WOT. the car just bogs dorn and makes worrying noises, needless to say i lift of wait a second then floor it again and its fine, must be excess water behind the closed TB?

Logs from the test track.

Code:
STAMP	 /min	 g/s	%	 °BTDC	STAMP	 CF	 CF	 CF	 CF
3.5	2800	79.92	100	24	3.92	0	0	0	0
4.3	3240	154.14	99.2	6	4.72	0	0	0	0
5.12	3920	163.89	100	8.3	5.53	0	0	0	0
5.93	4720	182	100	3.8	6.33	0	0	0	0
									
8.54	4160	143.75	97.3	12.8	8.94	0	0	0	0
9.34	4720	188.78	100	15.8	9.75	0	0	0	0
									
19.8	4160	105.81	99.6	26.3	20.21	0	0	0	0
20.71	4680	194.17	100	21	21.11	0	0	0	0
									
28.56	3480	122.5	98.8	23.3	28.96	0	0	0	0
29.36	4240	164.22	100	9.8	29.76	0	0	0	0
									
33.59	3840	100.47	92.5	21	33.99	0	0	0	0
34.5	4480	184.03	100	12.8	34.9	0	0	0	0
									
52.89	2480	62.28	98.8	20.3	53.31	0	0	0	0
									
93.44	2120	38.89	54.5	24	93.92	0	0	0	0
94.33	2360	58.28	100	6.8	94.73	0	0	0	0
95.15	2720	92.28	100	14.3	95.65	0	0	0	0
96.05	3240	113.44	100	13.5	96.56	0	0	0	0
96.96	3920	172.33	100	10.5	97.36	0	0	0	0
97.85	4480	180.83	100	20.3	98.25	0	0	0	0
98.67	4960	191.06	100	20.3	99.07	0	0	0	0
99.47	5400	206.56	100	15.8	99.87	0	0	0	0
100.27	5840	204.61	100	17.3	100.67	0	0	0	0
101.08	6040	136.64	31	0	101.58	0	0	0	0
101.98	4680	100.17	97.3	36.8	102.38	0	0	0	0
102.78	4640	100.36	99.6	14.3	103.2	0	0	0	0
									
107.91	4040	115.83	96.1	21.8	108.31	0	0	0	0
108.71	4320	180.22	100	19.5	109.13	0	0	0	0
109.63	4640	184.44	100	20.3	110.14	0	0	0	0
110.54	4960	192.11	100	16.5	111.03	0	0	0	0
111.54	5200	202.14	100	20.3	111.95	0	0	0	0
									
131.55	4200	188.78	99.2	12	131.95	0	0	0	0
132.47	4800	188.03	100	20.3	132.87	0	0	0	0
133.27	5280	200.22	100	20.3	133.76	0	0	0	0
134.16	5760	204.28	99.6	21	134.58	0	0	0	0
135.07	6160	210.22	99.6	21.8	135.47	0	0	0	0
135.87	5840	43.67	5.1	6.8	136.29	0	0	0	0
136.8	4960	96.17	35.3	12.8	137.28	0	0	0	0
137.7	5160	199.39	100	20.3	138.19	0	0	0	0
138.59	5480	205.69	100	17.3	138.99	0	0	0	0
									
146.44	4000	102.69	86.7	30	146.94	0	0	0	0
147.34	4200	178.14	100	18.8	147.74	0	0	0	0
148.16	4400	178.81	100	12.8	148.56	0	0	0	0
148.96	4560	181.47	100	15.8	149.36	0	0	3	0
149.76	4680	184.89	100	20.3	150.16	0	0	3	0
150.67	4880	190.56	100	20.3	151.08	0	0	3	0
151.56	3920	26.44	20	32.3	151.98	0	0	0.8	0
152.47	3960	90.81	74.1	12	152.87	0	0	0.8	0
153.39	4040	169.33	100	12	153.88	0	0	0.8	0
									
195.63	3960	184.22	100	17.3	196.12	0	3	0	0
196.64	4080	169.92	100	18	197.13	0	3	0	0
197.53	4240	175.61	100	19.5	198.04	0	3	0	0
198.54	4400	172.97	100	20.3	198.94	0	2.3	0	0
199.45	4560	180.28	100	20.3	199.85	0	2.3	0	0
									
218.76	4040	150.44	97.3	21.8	219.16	0	0	0	0
219.56	4280	174.61	100	19.5	219.96	0	0	0	0
220.37	4480	181.06	100	20.3	220.77	0	0	0	0
									
256.58	4240	101.58	86.7	32.3	257.08	0	0	0	0
257.48	4640	187.28	100	13.5	257.99	0	0	0	0
258.49	5760	208.25	100	17.3	258.89	0	0	0	0
259.29	4840	102.44	63.1	34.5	259.8	0	0	0	0
260.2	4600	176.86	100	15	260.7	0	0	0	0
261.11	4920	189.56	100	16.5	261.61	0	0	0	0
262.01	5280	201.06	100	16.5	262.41	0	0	0	0
262.81	5560	203.94	100	16.5	263.22	0	0	0	0
263.62	5600	0	5.5	0.8	264.02	0	0	0	0
264.42	4680	189.03	97.6	15	264.82	0	0	0	0
265.33	4880	192.61	100	15.8	265.83	0	0	0	0
266.23	5120	197.75	100	16.5	266.64	0	0	0	0
									
325.38	3800	166.36	100	10.5	325.78	0	3	0	0
326.18	4480	174.17	100	20.3	326.69	0	3	0	0
327.19	5560	203.94	100	16.5	327.59	0	3	0	0
327.98	5480	207.58	99.6	20.3	328.4	0	2.3	0	0
328.91	5680	207.92	100	16.5	329.39	0	0.8	0	0
329.81	6000	131.67	30.6	1.5	330.3	0	0	0	0
330.7	4680	104.64	96.9	14.3	331.1	0	0	0	0
331.5	4440	0	5.5	3.8	331.92	0	0	0	0
332.42	4640	122.11	95.7	27.8	332.82	0	0	0	0
333.33	4880	190.06	100	20.3	333.82	0	0	0	0
334.22	5200	199.97	100	18	334.62	0	0	0	0
335.04	5440	206.25	100	19.5	335.53	0	0	0	0
335.93	5680	205.92	100	20.3	336.45	0	0	0	0
336.94	5920	206.58	100	21	337.34	0	0	0	0
									
363.89	3760	95.19	95.7	9.8	364.4	0	0	0	0
364.8	4360	144.61	100	19.5	365.2	0	0	0	0
365.6	4480	190.31	100	12	366	0	0	0	0
366.42	5160	200.5	100	18	366.92	0	0	0	0
367.32	5520	205.58	100	19.5	367.83	0	0	0	0
368.32	5960	207.56	100	20.3	368.72	0	0	0	0
369.24	4760	114.36	87.5	2.3	369.73	0	0	0	0
370.13	4040	3.28	5.5	3	370.64	0	0	0	0
371.04	4280	50.47	20.8	19.5	371.54	0	0	0	0
371.94	4520	78.39	29	36.8	372.35	0	0	0	0
372.75	4760	194.44	100	16.5	373.15	0	0	0	0
373.65	5080	196.5	100	20.3	374.05	0	0	0	0
374.47	5320	204.33	100	20.3	374.96	0	0	0	0
375.36	4400	5	6.7	3	375.87	0	0	0	0
376.37	4160	10.67	7.1	3.8	376.77	0	0	0	0
377.17	4200	115.53	99.2	26.3	377.58	0	0	0	0
377.98	4400	185.53	100	20.3	378.38	0	0	0	0
378.78	4360	4.14	5.9	3.8	379.18	0	0	0	0
379.58	4280	9.06	6.3	4.5	379.98	0	0	0	0
380.4	4200	9.75	6.7	4.5	380.9	0	0	0	0
381.3	4160	55.61	27.8	6	381.7	0	0	0	0.8
382.11	4240	189.44	99.2	18.8	382.61	0	0	0	0.8
383.01	4440	182.33	100	15	383.41	0	0	0	0.8
									
396.68	3840	141.06	100	22.5	397.1	0	0	0	0
397.59	2360	46.78	24.3	18.8	397.98	0	0	0	0
398.39	3000	73.78	99.2	22.5	398.79	0	0	0	0
399.21	3680	93.44	100	20.3	399.71	0	0	0	0
400.11	4360	130.22	100	21	400.51	0	0	0	0
400.91	5440	205.58	93.7	4.5	401.32	0	0	0	0
401.72	3560	102.92	91	19.5	402.12	0	0	0	0
402.52	4080	181.25	100	12	402.92	0	0	0	0
403.32	4720	187.5	100	15.8	403.74	0	0	0	0
404.23	5080	195.72	100	20.3	404.63	0	0	0	0
405.14	3880	123.17	97.6	21	405.54	0	0	0	0
 
Last edited:

Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
Hmm cars running well with the 170? cc nozzle but still getting that strange bog down from 3rd and 4th. Must not be the meth so putting 2 and 2 together it must be fule due to the EGT problems.
 
Last edited:

Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
Sec mate ill boot up laptop and load them up,

Shop arround for a new controler tho buddy :)

mmmmmmmmmmmmmm
cmgsimage2.jpg
 

Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
Code:
STAMP	 /min	 g/s	%	 °BTDC	STAMP	 CF	 CF	 CF	 CF	STAMP
7.63	4480	181.72	100	20.3	8.14	0	0	0	3	
8.54	5080	196.5	100	17.3	8.94	0	0	0	3	
9.43	5600	202.33	100	20.3	9.85	0	0	0	2.3	
10.25	6040	205.58	100	16.5	10.65	0	0	0	0	
										
36.19	3440	85.19	93.3	27	36.59	0	0	0	0	
36.99	3800	145.64	100	10.5	37.41	0	0	0	3	
37.9	4480	187.5	100	12	38.3	0	0	0	3	
38.7	5040	197.44	100	16.5	39.12	0	0	0	3	
39.62	5560	202.97	100	16.5	40.11	0	0	0	0	
40.53	6000	207.56	100	18	40.93	0	0	0	0

Also i think im going to put my batt in the boot... I have an idea :happy: may need a hand my friend :) talk to you about it when i next see you.
 

Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
Photo0015.jpg


You could just cut that end bit of, that threadded bit is 11mm OD, so M10? Might be Imperial.

EDIT looking at that end bit again, does that look tapperd to you?
 
Last edited:
Feb 27, 2007
1,261
0
Behind Wilko
it wont be tapered (although it looks it), it also doesnt look like M10 (too fine) its probably an old BSF thread or something similar.
 

Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
Ok cool mate.

If i beg you can you get a tiny bit of welding done for me?

Also, if you make the intake flow better you will flow just as much air at a lower boost level.... So.. can we up our boost past PSP3 levels without a MBC?? Are we limited by our map sensor only beeing 2.5 bar?
 

Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
Fixed the EGT tonight, the earths had rusted up again, so i cleaned them and bridged the rusted one with the main bat earth.

Photo0018.jpg


Photo0026.jpg


I then ran some logs and :scary:, gear changes feel amazing power comes straight back on so i could not help keep the foot planted for the logs :ban:. Timing seems to have retarted but maybe thats due to the CF's. Can somone tell me is the stamp is 14 and the CF is all 3, is the 14 the resultant timeing, or the timeing before it gets pulled back?

Code:
STAMP	 /min	 g/s	%	 °BTDC	STAMP	 CF	 CF	 CF	 CF
29.27	3520	148.72	99.6	17.3	28.79	0	0	0	0
30.2	4240	177.5	100	8.3	29.69	3	3	0	0
31	4800	190.83	100	12.8	30.6	3	3	0	0
31.91	5360	204.92	100	15.8	31.49	3	3	0	3
32.8	5880	208.56	100	14.3	32.31	2.3	2.3	0	3
33.6	6280	214.28	99.6	15	33.2	2.3	2.3	0	3
34.42	6480	145.78	33.3	1.5	34.02	2.3	1.5	0	2.3
35.43	5280	204.33	99.2	15	34.92	0	0	0	0
36.23	5560	207.22	100	16.5	35.83	0	0	0	3
37.03	5840	208.56	100	17.3	36.63	0	0	0	3
38.05	6160	210.89	99.6	14.3	37.54	0	0	0	2.3
38.95	5880	13.89	5.9	6.8	38.55	0	0	0	2.3
39.75	5160	204.06	100	16.5	39.35	0	0	0	3
40.66	5360	206.25	100	16.5	40.15	0	0	0	3
41.46	5520	208.25	100	13.5	41.06	0	0	0	3
42.35	5640	209.22	100	17.3	41.95	0	0	0	1.5
43.27	5800	210.25	100	17.3	42.77	0	0	0	0.8

Then Injectors, not peaking over 100% now as the EGT is sorted.

Code:
STAMP	 CF	 CF	 CF	 CF	STAMP	 /min	%	 ms	 g/s	STAMP	
22.14	0	3	0	3	22.55	4600	191.7	18.02	185.97		62.95666667
22.95	0	3	0	3	23.35	5120	191.7	17.34	198.36		69.07666667
23.85	0	3	0	3	24.25	5640	188	15.64	204.28		73.984
24.66	0	1.5	0	1.5	25.16	6120	180.5	15.3	209.56		73.508
25.56	0	1.5	0	1.5	25.96	6440	171.4	14.28	211.92		78.03
26.37	0	1.5	0	1.5	26.87	5680	13.5	1.7	0.03		76.636
											
40.95	0	0	0	0	41.36	4920	191.7	17.34	192.89		71.06
41.86	0	0	3	3	42.26	5440	191.7	16.66	207.33		71.094
42.66	0	0	3	3	43.06	5840	191.7	16.66	206.92		75.52533333
43.47	0	0	2.3	2.3	43.87	6240	182.7	15.3	209.89		81.07866667
44.29	0	0	2.3	2.3	44.77	6560	173.7	14.96	211.25		79.56
45.18	0	0	2.3	2.3	45.58	5760	13.5	1.7	0.08		81.78133333

I should have logged lamba but i told the misses i was studdying tonight ;) its to late now tho :)

Just want to get the lamba fault sorted now which i think is wireing to.
 
Feb 27, 2007
1,261
0
Behind Wilko
i had to move that whole earth stud on mine as when i went to undo it, it sheared! its in a terrible position that catches lots of water.

timing doesnt seem as good now, id like to see some more logs.
 
Last edited:

Skorchio

600 Miles to a tank :)
Jan 23, 2007
1,570
1
Nr Milton Keynes
yeh i was kinda rushing it. Timeing looks good in 4th. I need to get some more air in so im going to be putting the second CIA in at the weekend. Im also looking at doing another mod to improve flow.

You comming to the show on sunday?