Anybody have any ideas on what fog light bulbs will look close to the factory xenons??
Found these on powerbulbs
http://www.powerbulbs.com/product_detail.asp?prod=17
Supposed to be HID effect...
Anybody have any ideas on what fog light bulbs will look close to the factory xenons??
What are the Mtec ones about Poverty ? Got a link ?
Was going to order some Nightbreakers as they've had pretty good reviews but am always up for trying something new
basically they are meant to give the xenon look. The nightbreakers are a nice improvement over OEM but still very yellow compared to the mtec and led sidelights.
The mtec dipped beam bulbs should fix that. Will post some pics tomorrow.
Found these on powerbulbs
http://www.powerbulbs.com/product_detail.asp?prod=17
Supposed to be HID effect...
basically they are meant to give the xenon look. The nightbreakers are a nice improvement over OEM but still very yellow compared to the mtec and led sidelights.
The mtec dipped beam bulbs should fix that. Will post some pics tomorrow.
Your either not impressed with the mTec's or your still out enjoying your new found night vision !?
Well they are better than the original ones from this thread, however my car still rejected the right sidelight one just like it did with the last pair. Basically the LEDs will work fine for 5 mins then the driver side one starts to flicker and just go out. So I have ditched them and bought a set of MTEC sidelight bulbs. Nearly as bright as the LED,s but without any hassle. Job done
Are these the sidelights you have? - http://www.hids-direct.co.uk/mtec-m...per-white-501-w5w-bulbs-sidelights-p-369.html
looks good mate , i have led bulbs with my xenonns and they seem a bit blue ?
wow with the bonnet open gives double the brightness , but how do you drive like that?
So not being content that the DRL bulbs in my TT as they looked very 'Yellow' compared to my Xenon's I went on a mission to replace these with a closer match. Now it is not a huge problem as it would appear that the DRLs and the Xenons are never on at the same time. I have the Auto Pack so just leave the lights set to Auto, thus when it is light enough the DRLs are on, and when it gets dark the Xenons and Side Lights come on, with the DRLs going off.
So firstly here is the OEM Factory DRL, which is the P21 variety:
I ordered 2 types of MTEC replacements the Super White and the Chrome Super White. The latter are slightly more expensive but do not give off the Blue Tinge that the non-chromes do.
Below is the Super Whites on the left and factory on the right and as you can see a much better look IMO:
However below shows the Super White on the Left again, with the Chrome Super White on the Right. Now there is a slight difference IMO but it is only slight:
I ended up staying with the Chrome Super Whites as a) whilst not too different I do prefer the light they emit, and b) when off they are not as noticeable and look more OEM.
Super White:
Chrome Super White:
The standard Super Whites do have a Blue Tinge to them, however this is only noticeable head on and with the car being quite low anyway so probably will never really be noticed:
Compare this to the Chrome Super Whites, which whilst still not perfect as they have a slight 'pearl' effect are an improvement to me:
Anyway I hope this may prove useful to anyone looking to upgrade the non LED DRL as these are not cheap especially not with the postage from Germany.
However if you do buy some I can say the Customer Service at Xenon White is excellent and as a result of this exercise I am selling the standard Super White's if anyone is interested.
Thanks and feel free to ask any questions, oh and nice touch Audi with the TT Logo on the DRL lense thingy!
This may be a stupid question but with those 100 watt bulbs.
Would they do any harm to the electrics if they were used all the time?
They are 4500k lights, the factory xenons are a more crisp white than the mtec however you can get the mtecs with less of a blue tinge, will post up some pics of the clear white mtecs
Ive just ordered them in 100w why will they fry the switch or the wiring? Cant see this happening to be honest.