-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
This chap's right, thats one of the reasons I got rid of my Pug and moved to a LCR
More Evil Twin-nery
12 litre boot water/methanol tank - shopping car position. Note it's removable for easy fill.
*It's a condition of my breakdown cover that I carry a spare wheel.
Water/methanol tank in trackday position.
Water/methanol safety solenoid with mbc attached. (Evil twin installation comprises a chopped length of car aerial to support the mbc) In the event of a low wmi flow, the solenoid allows boost to bypass the mbc, limiting boost.
The Safe Injection module of the wmi. This monitors flow and controls the solenoid.
(Evil Twin mounting bracket formed from a nice piece of Dural that came off a Thermorossi kitchen range I had a few years ago
)
There are red and green LEDs above my Nomad pillar mounted boost gauge to show what's happening. I'll probably fit a flow gauge at some point.
The safety system is working fine. I just need to figure why the wmi itself is not working at the moment
It worked before Iinstalled the safety system and it works with power applied direct to the pump. The wiring f*ckup fairy visited, I think.
12 litre boot water/methanol tank - shopping car position. Note it's removable for easy fill.
*It's a condition of my breakdown cover that I carry a spare wheel.
Water/methanol tank in trackday position.
Water/methanol safety solenoid with mbc attached. (Evil twin installation comprises a chopped length of car aerial to support the mbc) In the event of a low wmi flow, the solenoid allows boost to bypass the mbc, limiting boost.
The Safe Injection module of the wmi. This monitors flow and controls the solenoid.
(Evil Twin mounting bracket formed from a nice piece of Dural that came off a Thermorossi kitchen range I had a few years ago
)
There are red and green LEDs above my Nomad pillar mounted boost gauge to show what's happening. I'll probably fit a flow gauge at some point.
The safety system is working fine. I just need to figure why the wmi itself is not working at the moment
It worked before Iinstalled the safety system and it works with power applied direct to the pump. The wiring f*ckup fairy visited, I think.
Last edited:
Function over form again
You're saying my bay needs a style makeover, aren't you......
Looks ace dave, makes me want mine back ( the course my life has taken i could have well kept it, but thats a story for another time )
)That's my old starlet your overtaking there (in your sig) lol now owned by my mate. Looks like it was a good day out gutted i missed it
I see you have a rear strut brace... I was thinking about getting one for my Mk4 Ibiza. Does it stiffen up the rear noticeably? I already have a rear ARB (stiffest setting) and 20mm spacers.
It stiffen the rear of the Leon up - stops the creaks!
Hey dave, car is looking mint! Here in the Netherlands it snowed a lot as well the last few days and frankly i hate it...makes everything slippery and absolutely dirty.
Anyway was wondering about your water/methanol system. I recently bought a G60 which has a Aquamist system fitted to it, but I am unsure about the working of it and filling it.
I was told it needed a mixture of methanol and distilled water. Is this what you use, and if so at what mixture?
Furthermore, did you use regular silicone vac hosing to lead the mixture through?
this is my set btw on the right, now running off the window jet reservoir (can't begin to imagine why someone would do that tbh; so will deff be changing that shortly!)
Anyway was wondering about your water/methanol system. I recently bought a G60 which has a Aquamist system fitted to it, but I am unsure about the working of it and filling it.
I was told it needed a mixture of methanol and distilled water. Is this what you use, and if so at what mixture?
Furthermore, did you use regular silicone vac hosing to lead the mixture through?
this is my set btw on the right, now running off the window jet reservoir (can't begin to imagine why someone would do that tbh; so will deff be changing that shortly!)
Similar threads
