manifold

just wandering if you can get a better gasket than the standard one you can buy for a fiver? looked on various sites and haven't come across one? cheers

Need some help on finding a performance manifold for a mk4 cupra any one got one know where to get one whats the best on the market? help martyn. cheers

Been looking at a few manifolds on the great bay of eees and noticed that some say 50mm or 42mm... Also mentions a bit of extra something from the 50mm manifold... how do you know which one you have, is there a way of finding out without removing the manifold from the engine? And is it going to...

results and write up here> http://forums.vwvortex.com/zerothread?id=3098525&page=1 Confirming some of their flow results is my own 007 big port mani with r32 tbody... gained 30bhp/22lbft over the dual plenum big port mani on stock tbody i ran before.

Hi, i am having a lot of problems with my manifold gasket splitting and causing the car to blow, it is really starting to do my head in, i am wandering if anyone has come accross this before? the garage that keeps fixing it says that it is getting to warm and it cant cope, any ideas?

I've been considering whether the high flow manifold from ATP would be a worthwhile buy along with the GTRS eliminator - not from the perspective of cost - but 2 other reasons BOOST and RELIABILITY. I'm considering doing the GTRS coversion using the OEM VAG manifold - basically becasue I...

Revo Stage 2. Std Paper Filter in airbox (with cold feed) T7 HB8 Air temp 8.5 degrees Group A: '003 Group B: '020 Idle speed Air mass in Throt Angle Ignit Angle Idle Stabilization Idle Stabilization Idle Stabilization Idle Stabilization 700-820 rpm 2.0-4.5 g/s 0.2-4.0% 0-12 BTDC...

Hi just been browsing on youtube and came across this. Seems like a way off having a bov on the ibiza engine. Just wondered if this would work or would cause faults. Might be a way of having a loud bov as alot of people would like...

Where the manifold is, and the 4 pipes are coming from engine - there is a little oil there - near the engine side. anything to be worrying about? cheers

Has anyone any idea what to use to get the one exhaust manifold nut undone that's underneath the manifold between the turbo exhaust housing and compressor? It's the second bottom nut in from the gearbox end. :cry: Heeeeeelllllllp!!!!!

I've got an A&M manifold and K03s and I want to replace the manifold bolts (the three that hold the turbo on from the top of the turbo) Question is what type of bolts are they ?? I've ordered some standard ones from Seat and they don't fit, so does anyone else have a clue which bolts I need...

forge need 10 people to put this into production so list names hear and see what happens been a bit of interest dont know prices but if your interested put your name down 1 gazjones 2 rashcupra (cupra) 3 simon34 4 evo2345 5 ric2001 (cupra) 6 Dario 7 bunnin 8 small 9 10 Forge...

In the last week, my car has got very VERY loud under boost. (Like an elephant farting down a well). I suspected that I might have a fault with my BlueFlame turboback. I managed to get it checked today on a lift and there is nothing wrong with the exhaust or the turbo-dp gasket. A leads me...

Hi all, Recently i fitted an ATP manifild and in the first 300 miles i never opened it up but after that i started to try it out, seemed great loadsa torque boost was ok but i never booted it for longer that 1 or 2 gears. i am now now 1000 miles in and the turbo is behaving erratically, it...

Hi, Got a crack on the exhaust manifold of my Ibiza 1.4 (AEX) SXE, its beyond repair and needs replacing. New one is a £100 so looking for one from a breakers, my mechanic reckons the manifold from a 1.4 polo of the same year is the same. Can anyone confirm this ?

Anyone know if an S3/TT manifold can be fitted to the Ibiza?

Hello Since ive had the remap my manifold bolts keep trying to jump out :( It seems im tighening them up every week or so now :confused: I tried some threadlock type stuff from halfolds and that was all good for a month or so then the same thing happened :( Not sure if i used the...

hi all, Just put the car in to have my new inlet manifold gasket and power cam pulleys fitted, and the guys discovered that i have a cracked exhaust manifold, and a noisy oil pump...joy I dont want to get the manifold welded, it or replace it with a stock item cos i think it will happen...

Well the dealer just ballsed up my order and instead of getting me two 20VT intake gaskets got me one intake and one exhaust manifold one... Problem been is I was going to fit my evo shield gasket tomorrow. Has anyone ever re-used the intake gasket and had problems or has it been fine. Been...

hi guys im going to attempt to remove these items and send them off to the polishers. just wanted some advice from anyone who's done this, is there anything in particular i need to do, look out for, replace etc. many thanks