manifold

i want to clean out the manifold and saw complete instructions on how to do this, but have lost them. can anyone find them or have them thanks

Just went out in my car and noticed a loud noise when under boost. It only seems to happen when accelerating and the turbo is boosting. I can't seem to reproduce it when just revving at standstill, but it does sound a bit different. It was fine earlier today, now this! Any ideas?

http://www.thsperformance.co.uk/acatalog/Transverse__Golf_Bora_Seat_Leon_Cupra_A3_TT_all_150-180bhp_models.html anyone tried one of these manifolds as from the comparing pictures on the site there is quite a considerable difference in size and as i am fitting a k03s to my ibiza soon im...

i've been told about a cheap exhaust manifold available from here http://www.xs-power.co.uk/index.php?main_page=product_info&cPath=37&products_id=308&zenid=428b0eb5c0f79c90e0f4ae658915d9cf it looks like a stock location jobbie and was wondering if it would be worth a go at under £300? i've heard...

My cars had the VAG-COM treatment today (thanks to Ric 2001) And its got the following error: 17564 P1156 Manifold Abs.Pressure Sensor Circ. Open/Short to Ground So does anyone know where the sensor is so i can check out the wiring?

Do you need this metal bit that is covering the manifold?? Its the bit in the yellow box with the red arrow pointing to it. Im just wondering as mine is loose and i dont think it is going to hold much longer.

thought i'd take this piccy after a long fast run home from work one nite!!

he guys ive been looking at a bigger intake manifold that i saw an ebay here, (largeport) do you think this one can give me any gains with the following setup k04 023 with all the stuff 2,5" catlless exhaust forge fmic 4 bar + tt injectors bigger tip the tuner here can get 275...

Hi Guys, I recently got hold of a second hand manifold for an LCR 225 - its going to be sanded down and polished, but the inside of it is covered in oil - can anyone recommend how i go about cleaning the inside of it? Not being the most knowledgable of car parts i dont want to do anything...

http://forums.vwvortex.com/zerothread?id=3636930 A varied collection of tinternet harvested 1.8T manifolds one guy is posting up for general consumption. Some good some bad. some simply f_ugly :D enjoy

Hi all, right i've finaly started the ball rolling with my BT conversion it's going to be a top mounted twin scroll turbo and i'm now in the process of getting all the bit's together to fabricate my equal lenght manifold, but before i start i thought i would ask you lot your opinion on a couple...

i think i remember reading here that there wasnt a ss/ manifold available specifically for the 16 valve ibiza. I spoke to a garage in aberdeen today who are fitting my new supersprint system and the guy told me they listed a 4 branch manifold for approx 350, just incase anyones interested!?!!

Hi. I'm looking for some ideas of costs from you guys. I have a 2002 Leon Cupra 180 with a stage 1 remap taking the brake up to 210. I left my car in for service today with a highly recommended, independent mechanic near my area in Dublin. The car has had the Engine Diagnostic warning light...

hey can anyone help me where can i get a stainless manifold and decat for a p reg 2.0 16v???? i have been looking everywhere

Hello all, Hope you've all had a good Christmas... Anyway, my mate and I were talking and he seems to think that the exhaust manifold on the ABF is the same as on a Volvo Turbo Diesel. He says this means it'd be both cheap and easy to turbocharge 16v Ibiza's and Golf's. I said it's...

I got hold of a large port inlet manifold and trying to fit it to my BAM engine and the injector seats are too small for the injector to slot in. The injector diameter is the same(nozzle with the 'o' rings) but the injector body itself is too wide for the injector to slot all the way in. You...

Am wanting to get an equal length manifold for stock location ko3/ko3s etc Does any1 else make them other than jbs? Cause £650plus vat is a fair bit for just a manifold. Ave seen these...

just finished polishing my inlet manifold, it has come up quite good considering i only used a tyre buffer and some t-cut! saved me some money anyway!

Is there a version of the IHI Vf turbo range that will 'bolt up' to the stock ko4 exhaust manifold? :confused:

we took the kit off yesterday to change some gaskets and a few other bits and i got a few pics of the manifold off the car. they are very bad phone photos! the flaky stuff is just paint. all welds look strong and the metal is very strong and thick. the manifold, DP + decat pipe option, TIP...