2 new front DCC shock absorber for the Leon Cupra. £218 for the pair, and £187 for the labour.
what did you and your mk3 leon do today
- Thread starter seatleon2012
- Start date
I updated my Radio Station Database today, from 1.10.10 to 1.10.48.
I'm wondering why this needs to be done, surely the radio will search for all stations that are available?
I'm wondering why this needs to be done, surely the radio will search for all stations that are available?
This database keeps station logos, to be shown in the infotainment unit.
The new version should have newly added or changed logos.
Sorry if you already knew and I misunderstood your post.
I did kind of think that, but the Logos have not appeared on my station presets, I know I can manually update them from files stored on an SD card but it's a bit of a faff.
Did you ever try to push & hold on a station preset button for a couple of seconds?
That should bring the related logo in place.
I'm trying to find the link, may take a while, I saw it on one of the posts on this forum but can't find it now!!
Ordered new Track Specific Mintex Pads (Mintex F4R Pads not for road use) and some Ferodo DS Performance – Mono 6 for daily drive use as the Mintex pads I was using for the road have now been discontinued which is a shame as they were much better than the Ferodo but the adverts do say they (Ferodo) have a new compound so will have to see how they last/cope compared to the old DS2500 (Which on the track worked well but did not last long at all)
While I was at it I also ordered a pair of Racingline Adjustable Camber Rear Control Arms - VAG MQB so that I can adjust the rear camber to match the front setup and it will also give me the ability to change the setup easily once i have been out on the track with the new setup.
While I was at it I also ordered a pair of Racingline Adjustable Camber Rear Control Arms - VAG MQB so that I can adjust the rear camber to match the front setup and it will also give me the ability to change the setup easily once i have been out on the track with the new setup.
That happens. The database is probably missing some stations, or they might have changed their name or frequency.
Sent from my 23013PC75G using Tapatalk
Bought a braking upgrade, new calipers with Mintex MRM1801 pads, made a start on sound deadening under the rear seat and in the boot, still got some bits to finish off, missis has driven the car on the motorway and she noticed the difference 
even commented the music sounds better, normally she cant hear the difference in anything
even commented the music sounds better, normally she cant hear the difference in anythingAttachments
-
IMG_9839.jpeg -
IMG_9796.jpeg
Changed the 3 cheap glow plugs today. No issues, used some penetrating oil yesterday and today, and got her warm before going to work. Can anyone recommend the best place to get hold of the glow plug with the pressure sensor, I believe the part no is 03L905061K. Also not sure how important it is to match the last letter, seems to be many variants. Any advice welcome.
The last letter indicates a revised part, the later the later the later the revision, so the latest one would be best, but all should fit.
As for where to get it, i would shop around reputable vendors (gsf, eurocarparts,main dealer etc) to see who has it the cheapest. Avoid ebay/amazon etc as they will be some cheap chinese crap.
Thanks. GSF don't have them, EuroCP want £146 for one. I'll keep looking.
Don't know whether to try RealOem.parts for 86.68€ including shipping. About half of what EuroCP want.
Last edited:
Autodoc is also worth a look, although usually takes about 6 days to be shipped from germany
Thanks, had looked at AutoDoc but expensive or OOS.
Ordered from TPS for just shy of £130
Similar threads
