It should always turn on in the mode you leave it in. Only downside is if you leave it in Cupra mode, the start-up sequence for some reason opens and closes the flaps, and then shuts them
Not practical in town all the time too jerky lol. i use the car for work in town i am a mobile engineer work local so its PITA... try cupra mode in stop start traffic in a busy town not fun at all........
Cupra mode and Drive is fine. Sport is jerky
must be my shitty car then ......cant wait to get rid . lit up like a christmas tree again yesterday on the day all sorts of warnings .Cupra mode and Drive is fine. Sport is jerky
Sent from my Pixel 6 Pro using Tapatalk
Cam I just check what version of software you have? I'm curious why mine defaults to comfort and yours stays in the mode you left it in.It should always turn on in the mode you leave it in. Only downside is if you leave it in Cupra mode, the start-up sequence for some reason opens and closes the flaps, and then shuts them
You then need to go to another mode where they're shut, and back into Cupra to open them
Sent from my Pixel 6 Pro using Tapatalk
I would take that in to the dealer.
You don't mean the light bar on at anytime ?:Have another question for the wizards:
Welcome light animation extension; I love it, but it has to be pitch black before the car wants to do the animation. Here in Scandinavia I will probably never get to see it for the coming 4 months, except for 2-3 hours at night. So I would like to extend the time of day it activates.
Now I found the function to change the light threshold for activation, it's 600 lux per default, but attempting to change it I get error 31 (function not supported).
Googe fu tells me 2 workarounds: Switch to Developer mode in OBDeleven, or clear cache and data from the app. Neither works
Here is the function:
- Central Electrics 09
- Adaptation
- “Light sensor”
- “Einschaltgrenze_CHO_LHO”
The data field states 0-255 as input value, but that doesn't make much sense, since none of the lx values are that low.
Any ideas as to what is going on here, or a different workaround? Having the animation all day would be so nice.
www.seatcupra.net
I have that setting from Deano already, so my lightbar is always on. However that doesn't extend to the CHO/LHO animation activated by the key fobYou don't mean the light bar on at anytime ?:
Deano had the coding for that further up. No need to use the micropayment apps for that.
This:
OBDEleven Formentor - See below for working ones
Using OBDeleven pro - I looked through control unit 09 earlier. Control Unit 09 ( Central Electrics ) Adaptation Daytime Running Lights Daytime Running Lights / Parking Light Currently not active - going to try active tomorrow Control Unit 09 ( Central Electrics ) Adaptation Daytime Running...
at least in my car.
What does this display, exactly? I have the accelerometer in my display, showing G-force in all 4 directions - but that's a standard setting.
Acceleration measure so I'm taking it would display 0-62 time? Yeah I know there is g force, power and torque but would be nice to have 0-62 mph measured and displayed on the dash
only found power and torque, but torque is bugged for me and always stay a 0.
Might be one of those suppressed menu screens you get on mib2 where you need coding on the infotainment screen to put up another menu option. You then save it on Obdeleven, reboot the infotainment then it gives you an additional menu on the infotainment screen if I haven't got hold of the wrong end of the stick. E.g.. You have it on the virtual cockpit but not the infotainment screen... Think that's what you are saying.Sweet!
I took a look and found the "Acceleration measurement" option and added it to the dash, along with power and torque.
But can't find it when scrolling through the dashboard contents and options
I think I get what you're saying. I'm still a bit new to this. But yes, it seems the infotainment screen just isn't setup to use the acceleration input as is.
