what have you done to your car today ?

Sl1ced

Active Member
Oct 10, 2020
797
404
Took mine out today with its new standard valve.
Definitely better than with the forge.
A lot quieter aswell.
So other than a slight note on idle and when flat out from the exhaust, its no different from standard.

I really like the tssssshhhhht sound from my turbo smart so it’s going back on.

This is a picture of me
giphy.gif



Sent from my iPhone using Tapatalk
 
  • Haha
Reactions: Rich.T

iammooks

Active Member
Nov 27, 2018
1,784
1,172
That’s inaccurate mate vin diesel has more than 15.


And I got 100 gears and direct injection nos on a red button seriously though that first film is amazing


Sent from my iPhone using Tapatalk

"Warning!!! Danger to Manifold"

"Shut up!"

Floorpan falls out.

Wat...?


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Rich.T

Scotty_b

Leon Cupra 300R
Jun 3, 2004
6,026
66
Hertfordshire
41e74267b033281f415c5e9923eb0269.jpg

So I’ve stripped all the sound matting out to dry it out - only started off changing the radio!

Question is whilst I’m there is it worth doing anything else? I know dyno mat is over rated but is it worth replacing the stock insulation with something better?
Or anything else to do whilst everything is out - apart from a clean and doing the door seals - I need new components front and rear anyway.


Sent from my iPhone using Tapatalk
 
  • Like
Reactions: Rich.T

Rich.T

Active Member
Feb 15, 2020
1,609
932
41e74267b033281f415c5e9923eb0269.jpg

So I’ve stripped all the sound matting out to dry it out - only started off changing the radio!

Question is whilst I’m there is it worth doing anything else? I know dyno mat is over rated but is it worth replacing the stock insulation with something better?
Or anything else to do whilst everything is out - apart from a clean and doing the door seals - I need new components front and rear anyway.


Sent from my iPhone using Tapatalk
Ideal time if you're going loud stereo with amps and all that 👍
 

iammooks

Active Member
Nov 27, 2018
1,784
1,172
Only when I got old enough and understood more did I realise why my dad called them bullshit


Sent from my iPhone using Tapatalk
It's like Monty Python in that part - intake or exhaust manifold?

African or European swallow?
 
  • Like
Reactions: Sl1ced

Thai-wronghorse

Self proclaimed Cupra R addict & butcher!
Dec 3, 2015
2,240
1,093
Kent
41e74267b033281f415c5e9923eb0269.jpg

So I’ve stripped all the sound matting out to dry it out - only started off changing the radio!

Question is whilst I’m there is it worth doing anything else? I know dyno mat is over rated but is it worth replacing the stock insulation with something better?
Or anything else to do whilst everything is out - apart from a clean and doing the door seals - I need new components front and rear anyway.


Sent from my iPhone using Tapatalk
If you've gone that far mate I'd throw in a selection of Silent Coat products, decent quality and cheaper than the bigger well known brands.
I've used it on several cars over the years and my Leon is almost completely covered in it.


Sent from my SM-G986B using Tapatalk
 
  • Like
Reactions: Scotty_b

Scotty_b

Leon Cupra 300R
Jun 3, 2004
6,026
66
Hertfordshire
If you've gone that far mate I'd throw in a selection of Silent Coat products, decent quality and cheaper than the bigger well known brands.
I've used it on several cars over the years and my Leon is almost completely covered in it.


Sent from my SM-G986B using Tapatalk

Any recommendations on products and places to read about installation etc? Don’t really fancy putting all the old insulation back in but it’s fairly thick so guess it needs to?


Sent from my iPhone using Tapatalk
 
Lecatona HPFP (High-pressure Fuel Pump Upgrades)