-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Oh No - Youv'e bought THOSE ones ....wanders off shaking his head - best thing I can do is save you from yourself by letting you give them to me....
Scored today and picked up a front TT 225 assembly :
subframe
quick rack
tie rods
hubs
Drive shafts
ARB
wishbones
ball joints
oh and front suspension lol
for 60 quid!
If anyone wants the ARB for free let me know
subframe
quick rack
tie rods
hubs
Drive shafts
ARB
wishbones
ball joints
oh and front suspension lol
for 60 quid!
If anyone wants the ARB for free let me know
Fvck me that was cheap! Steering racks go for that alone.
Sent from my SM-G986B using Tapatalk
Right!? and 8 miles away what a treat. I had to hack the tie rods off but a small expense lol.
I wasnt even going to do the rack swap but i couldnt say no!
Now to source some defcon/cookbot inserts for the wishbones lol
Cool
guessing it’s a case of top plate above, rest of it below and try to get them levelIf you go to CB Autos website and the cookbots are listed out of stock, message them and they’ll list a set for you (they did for me)
yeah fit the two black plates sandwiching the tower, nut down the silver inner on the damper and bring it up thru tower, fix with the 4 allen boltsCool
Let me know if you get knocks, im trying to elimite some and i cant tell if its coilovers or top mounts (they're tight af alread
I emailed him twice before to no reply, but ill try get at him via facebook thanks for that tip. Maybe he makes them to order or somethi ng
yeah fit the two black plates sandwiching the tower, nut down the silver inner on the damper and bring it up thru tower, fix with the 4 allen bolts
Let me know if you get knocks, im trying to elimite some and i cant tell if its coilovers or top mounts (they're tight af alread
I emailed him twice before to no reply, but ill try get at him via facebook thanks for that tip. Maybe he makes them to order or somethi ng
Will do. They never replied to me, I just kept checking the site after asking and there they were
A big expensive rotating lump of metal arrived today. 
Sent from my SM-G986B using Tapatalk
Sent from my SM-G986B using Tapatalk
A big expensive rotating lump of metal arrived today.
Sent from my SM-G986B using Tapatalk
If you don’t like it let me know and I will take it off your hands.
Sent from my iPhone using Tapatalk
i am too f**cking jealous, hope you got a good price!A big expensive rotating lump of metal arrived today.
Sent from my SM-G986B using Tapatalk
Yeah it was very reasonable considering what they cost brand new.
I had toyed with the idea of getting an LSD but the cost was hugely off putting but stumbled upon this one on eBay and thought sod it this is my most cost effective option of going this route.
I've also sourced a very cheap 4th gear input shaft support which should come next week.
Next on the bargain hunting list is steel shift forks...
Sent from my SM-G986B using Tapatalk
Fitted the new OE dv and replaced the hose between the intake pipe and puck. Its an inch or so longer than the one that was on there. Now the puck sits higher than the top of the catch tank (slightly).
There was mayonnaise in the pipe i replaced, which means its getting into the tip n turbo. Getting me down now and cant figure out what to do next.
There was mayonnaise in the pipe i replaced, which means its getting into the tip n turbo. Getting me down now and cant figure out what to do next.
Why can't you just cut the red pipe shorter to lower the puck?
Sent from my SM-G986B using Tapatalk
I want it higher. The idea being to try to make the path from the catch tank to the puck an up hill one to reduce the moisture to it. I know it wont stop the moistutre in the vapour, more the droplets.
Any higher and it'll touching the bonnet. Other than that you'll need to lower the catch can. 
Sent from my SM-G986B using Tapatalk
Sent from my SM-G986B using Tapatalk
Yeh, its just shy of the top edge of the heat shield.Any higher and it'll touching the bonnet. Other than that you'll need to lower the catch can.
Sent from my SM-G986B using Tapatalk
As for the catch can, the screws are barely long enough to go through the brackets they do. So will struggle to put spacers in(could source longer screws).
Similar threads
