what have you done to your car today ?

[MoToJoJo]

Both sell incredibly well and shouldn't hang around for long if priced properly.

Sent from my SM-G986B using Tapatalk

I'd sell my leather interior too but I need replacement seats first

 

[iammooks]

Yep - I can already tell that back one is going to be an utter ******* to get back on.

No snapped studs or rounded nuts though.

Sent from my iPhone using Tapatalk

 

[Rich.T]

Looking good

 

[iammooks]

Lookong good

Just checked the inside of the turbo - solid as a rock.

I can't tell you how pleased I was to find that.


Sent from my iPhone using Tapatalk

 

[Rich.T]

Fill it up, work it then go get a cuppa

 

[iammooks]

Fill it up, work it then go get a cuppa

Actuator is pretty solid. I'm comparing it to the actuator for the EGR valve - would that be a fair comparison?


Sent from my iPhone using Tapatalk

 

[Rich.T]

I gave mine a load of beans and found a good 1/2 inch of movement that wasn't there before.
If you do it by hand and not levering it about with a screwdriver etc, i cant see you doing any harm putting some weight into it.

No idea how it compares to the egr unfortunately.

 

[iammooks]

I gave mine a load of beans and found a good 1/2 inch of movement that wasn't there before.
If you do it by hand and not levering it about with a screwdriver etc, i cant see you doing any harm putting some weight into it.

No idea how it compares to the egr unfortunately.

Just stopping for lunch. I didn't realise how late it was. I'm hoping I've sprayed enough in there for it to work - access isn't the easiest - but it does expand, and not much is coming out.

Checked my nearside wheel as I got an advisory for play in the bearing on the MoT and it's really obvious. I'm going to check to make sure it's not something stupid like the wheel isn't torqued properly, but that's a job I can't do myself, which sucks.


Sent from my iPhone using Tapatalk

 

[Gokiwi64]

Replaced all 4 coil packs and plugs - All 4 locking tabs on the plugs are broken - cable ties for the win

 

[Sparkie]

Replaced all 4 coil packs and plugs - All 4 locking tabs on the plugs are broken - cable ties for the win

Did it fire up ok?


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.

 

[Gokiwi64]

Did it fire up ok?


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.

Yup sure did - starts easier and rev's freer (is that a word) - so am guessing been on their way out for a while.

 

[Connor H]

Think it’s a Bosch unit.
I had a forge.
Bill @B5 advised me to change to original before our mapping session.
They are cheap too. Maybe 30 odd quid.


Badger5 Custom Map + TIP,
3”Custom exhaust, FMIC, Bosh 550’s, BC Coilovers, ARB’s +loads more.

You guys have me wanting to try my OE dv again lol

 

[Sl1ced]

You guys have me wanting to try my OE dv again lol

I’ve put mine back on will report back in a week


Sent from my iPhone using Tapatalk

 

[Sl1ced]

Also guess what. My gearbox plugs aren’t 17mm they’re smaller. got my oil out got the car up got excited then disappointed.


Sent from my iPhone using Tapatalk

 

[Rich.T]

Tamperproof splined aren't they?

 

[Thai-wronghorse]

Tamperproof splined aren't they?

Yes

1/2" Dr Oil Drain Plug M16 Spline Key VAG VW Audi Automatic Gearbox Transmission 5903246522051 | eBay

ASTA A-12SS16M is 1/2" square drive, M16 spline oil drain plug socket key and 55 mm in length. Sockets have knurled ring for better grip and performance. 13pc Adaptor 10L Transmission Gearbox Oil Change Filling Pneumatic ATF Pump.

www.ebay.co.uk

Sent from my SM-G986B using Tapatalk

 

[Rich.T]

Sent from my iPhone using Tapatalk

All done?

 

[Sl1ced]

Tamperproof splined aren't they?

Mine isn’t splined as far as I can see it’s just a large hex


Sent from my iPhone using Tapatalk

 

[Rich.T]

Mine isn’t splined as far as I can see it’s just a large hex


Sent from my iPhone using Tapatalk

Both drain and filler bungs?

 

[Sl1ced]

Both drain and filler bungs?

I believe so chief. I’ve sprayed a bit o carb cleaner there to get a better look. Thought I was gonna cheek it with a 17mm as I have a motorcycle spindle tool that’s 17, no dice


Sent from my iPhone using Tapatalk