What did you and your MK2 do today?

[G4reth]

Nice mate ^^

 

[G4reth]

I changed my rear discs and pads today. All easy to do except for one caliper bolt rounded off. Luckily the new pads came with new bolts.

 

[Daniel M]

Had a new tyre fitted.

 

[hoggy90]

Hand waxed, hand polished and bumper grills sprayed to match the car

Sent from my D6603 using Tapatalk

 

[Danny.Parkes]

Hand waxed, hand polished and bumper grills sprayed to match the car

Sent from my D6603 using Tapatalk

Love your car mate proper nice


Sent from my iPhone using Tapatalk

 

[hoggy90]

Love your car mate proper nice


Sent from my iPhone using Tapatalk

Cheers Danny

Sent from my D6603 using Tapatalk

 

[Never2old]

Looking nice n shiney is that green lamin x or flyeye tint on them fogs

 

[hoggy90]

Looking nice n shiney is that green lamin x or flyeye tint on them fogs

Took me ages by hand mate. Done my shoulder in! It's green lamin x mate. Got the flyeyes all round except for the fogs

Sent from my D6603 using Tapatalk

 

[Never2old]

Where did you get the lamin x from wanting yellow

 

[hoggy90]

Where did you get the lamin x from wanting yellow

Just a generic eBay seller mate
Just searched 'lime green headlight tint'

Sent from my D6603 using Tapatalk

 

[Shawn-C-87]

Currently camping at knockhill in the pissing rain..... Atleast it's to be dry for race day tomorrow.

 

[G4reth]

Replaced the gearbox oil in the FR tonight.

 

[Fishy]

Cambelt change and replaced the clutch back to a dual mass.

Fish

 

[nick-fr]

Fitted some new bulbs today but not sure if they need adjusting, I made sure they're sitting right so that's all good, any help is much appreciated

Sent from my C6603 using Tapatalk

 

[G4reth]

What bulbs are they? When I changed mine a few weeks ago they went out of alignment.

 

[nick-fr]

I've had a 6k hid kit fitted for about a year and noticed the bulbs were a bit tatty so bought some replacement bulbs and the beam looks different now

Sent from my C6603 using Tapatalk

 

[STU3Y]

Fitted some new bulbs today but not sure if they need adjusting, I made sure they're sitting right so that's all good, any help is much appreciated

Sent from my C6603 using Tapatalk

Pull up facing a brick wall nice and close and use the cement lines to see where lights are. That will tell you if they are out of position left to right. Then find centre of your bulb in headlight and locate the cement line DIRECTLY in front of it. Mark this on the wall on both sides unless your memory is good. Then drive back 25 feet. (Around 2 car lengths.) Your headlight beam should line up with the mark you made earlier. If it doesn't adjust accordingly. This is only a rough guide but has served me well over the years and passed every mot.

 

[nick-fr]

Pull up facing a brick wall nice and close and use the cement lines to see where lights are. That will tell you if they are out of position left to right. Then find centre of your bulb in headlight and locate the cement line DIRECTLY in front of it. Mark this on the wall on both sides unless your memory is good. Then drive back 25 feet. (Around 2 car lengths.) Your headlight beam should line up with the mark you made earlier. If it doesn't adjust accordingly. This is only a rough guide but has served me well over the years and passed every mot.

Thanks for the help all sorted now

Sent from my C6603 using Tapatalk

 

[Unit9]

So this came today

Cupra R optional defuser' Hopefully get it on and painted next week or so' then straight off to do the exhust

 

[Asce]

Had new steering rack and cam belt fitted. Now have a rubbing noise as the revs increase.