Deej's mk1 LCR 225

lukehowardd

Active Member
Jan 1, 2015
93
0
Teflon spray arrived so I coated the inside of the air box and re fitted. Also removed the annoying but of standard feed behind the head light so my larger one fits just nicely!

fd3de0ef740fc33cbf5ac55e151d082b.jpg


198bee87c7b98ca8024afded3a1e43a5.jpg


3dd62530e075783d350d4bb5fc2833f0.jpg




Stage 2 mk1 LCR amd tuned 291bhp

http://www.seatcupra.net/forums/showthread.php?t=366267
Have you just placed it over the end of where the old intake pipe connects to behind the light!?
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
No I have taken that out as it is a lot smaller and restrictive.


Sent from my iPhone using Tapatalk
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
Just got the email telling me off lol looks mint mate thanks. Pm me to sort payment and delivery.


Sent from my iPhone using Tapatalk
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
a56940c2ef448a9058cb1398e6a604fd.jpg


Old charge pipe bracket against D.K's polished one. Thanks mate.

Now fitted:

57e3a96e0849a15f5b45420a0937299b.jpg


Could do with a stainless nut now too lol


Sent from my iPhone using Tapatalk
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
Ordered these off of an s3. Just have to make up a wiring loom and get them wired into the dimmer switch.

1240b39fb66d623bc60afedda39f3a98.jpg


May swap out the middles from my vents so they are red not white though.


Sent from my iPhone using Tapatalk
 

D.K

LCR 225
Oct 24, 2007
6,408
3
se london
a56940c2ef448a9058cb1398e6a604fd.jpg


Old charge pipe bracket against D.K's polished one. Thanks mate.

Now fitted:

57e3a96e0849a15f5b45420a0937299b.jpg


Could do with a stainless nut now too lol


Sent from my iPhone using Tapatalk

I used black ones on mine.
Get some fine grade wire wool and autosol on that charge pipe and it will bring the shine out, is it a Forge pipe ?
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
Yes it's a forge non resonated one. Got autosol will have to source some fine grade wire wool.


Sent from my iPhone using Tapatalk
 

t0m

LCR 225
Apr 29, 2007
8,133
7
Kent
Take the pipe off and do it where it's warm, autosol works better with higher temps. Always go over mine often in the summer for better results.

Liking the vents mate look forward to seeing those installed.
 

bruceR

Active Member
Apr 11, 2005
2,558
647
Monifieth, Dundee
Ordered these off of an s3. Just have to make up a wiring loom and get them wired into the dimmer switch.

1240b39fb66d623bc60afedda39f3a98.jpg


May swap out the middles from my vents so they are red not white though.


Sent from my iPhone using Tapatalk

I done this to mine last year, very easy - check my readers ride for info ;)
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
Cheers dude will do. They should come this week. I also got hold of the loom plugs that the vents plug into from another s3 being broken. Will make the loom a bit neater and easier. Il check your rr out before i do anything!


Sent from my iPhone using Tapatalk
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
Stereo packed up a while ago so decided it's about time I modernised. All my music now being either on my phone or computer. So went and got this.

5e48bb5ade3b368ec2cc65166ee57abe.jpg


Dab, Bluetooth and usb. But most importantly can be red to match the other dash lights!!


Sent from my iPhone using Tapatalk
 
Last edited:

rossi46

Active Member
Jan 1, 2011
495
0
Kent
So got to fitting the dab arial and hands free mic. Took the glovebox out for ease of access to run cables and ran cables in roof lining and a pillar.

Pulled pillar trim off:
252c9930afd47bb5d17ab3d305b03fa3.jpg


Clipped microphone on roof lining and ran cable up inside the roof lining to the passenger a pillar:
2119e1392b5c625c1384ed07539bed82.jpg


Then ran cable along with interior loom and tucked into dash area:
f0ef3698bdfd98be622268932210ccea.jpg


Dropped glovebox out. Only a few torx screws and pulled cable down from dash and ran to centre console behind radio.
398d6cca401538fdd42007612f98eaa0.jpg


d10583427e5292be3360ce300cf6d5d1.jpg


Then stuck the dab arial onto the screen and ran the cables for this in exactly the same way and route as the mic cables:
9decfb0717c9e95fd47fb95468c3be4f.jpg


Then rebuilt the dash and cabin area.


Sent from my iPhone using Tapatalk
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
Before and after radio pictures. Forgive the fascia surround as this has still not arrived. Will post again when it's fully fitted.

983b568672f7c08a1ac92210ef4d8b1a.jpg


64daa9550079b502de1d5f6a18f50bb2.jpg



Sent from my iPhone using Tapatalk
 

rossi46

Active Member
Jan 1, 2011
495
0
Kent
When the fascia surround arrives il pop the finished pics up. Very happy with its functions and quality. Recommended. Would have loved a double din but did not fancy doing all the work changing the consoles. Very happy medium.


Sent from my iPhone using Tapatalk
 

Liam_G87

Active Member
Mar 13, 2013
11
0
Leighton Buzzard
Just read through your thread mate, very nice car!

What's the sound quality like on the new head unit? I'm thinking of getting the same one. You going to upgrade your speakers?
 

t0m

LCR 225
Apr 29, 2007
8,133
7
Kent
Nice work mate, head unit must be much better than the old one remember when I changed mine.
 
Genuine SEAT Parts and Accessories.