K04 MK3 Ibiza Cupra Track Ready - RIP

[Chambers_CUPRA]

You should've welded the relentless up mate. Just some support plates.

I was going too but if it broke whilst at the nurburg ring ill be well annoyed and stuck lol

Once its back ill have a re think

Relentelss V4 is in testing tho aint it 41 or 42mm runners

 

[Chambers_CUPRA]

So are the restless manifolds bad for cracking?

You'll be glad to get it finished will you?

Haha

Yeah they are and the ports not lining up with the head

 

[yellonvi-R]

Yeah it is, the 3 is good still. As far as I'm aware it there v1 that's the cracker not the rest. I've got a cast hi flow in the garage somewhere just took it off that red hybrid.

 

[Chambers_CUPRA]

For k04?

How much you after for that?

 

[yellonvi-R]

Oh nah was used with k03 hybrid

 

[Berg]

Nearly there mate, i reckon its gonna sound lumpy with pops and bangs with the injectors and fpr in...until its mapped anyway...it might be a good idea to leave them out until you get to revo

Might get an arp head stud kit for mine so its easier to put back on than yours haha

 

[yellonvi-R]

Your getting it mapped before you go aren't you???

 

[Chambers_CUPRA]

Nearly there mate, i reckon its gonna sound lumpy with pops and bangs with the injectors and fpr in...until its mapped anyway...it might be a good idea to leave them out until you get to revo

Might get an arp head stud kit for mine so its easier to put back on than yours haha

She runs quite sweet tbh. Ran her up to temp and turned off to cool for tonight

Defo on the ARP stud kit lol be loads easier lol especially with your head. Be heavy enough as it let a loan a big weight hanging off it

Your getting it mapped before you go aren't you???

Yeah defo

 

[Chambers_CUPRA]

Got the car running tonight and looking more like a car lol

Got some work to do tho. Need to sort the DV pipes out before I can drive it and the whole bay need tiding before GTi Inters

On idle

Bay ATM

Car like

Oh now have a blueflame decat 2.75in with wide band boss welded in to sell

 

[mc funbot]

Looking good boss.. I need to sort my bay out as well.. It's filth!!

 

[Chambers_CUPRA]

Looking good boss.. I need to sort my bay out as well.. It's filth!!

Thanks mucka

 

[mugge]

One of the best cupras ive seen!!

 

[Chambers_CUPRA]

One of the best cupras ive seen!!

Thanks mate

 

[Chambers_CUPRA]

Did the 20mile run in today

Found this site useful

http://www.mototuneusa.com/break_in_secrets.htm

Start with I sorted a few pipes so I could drive it

Few pics out the garage for once

Bonnet on warmed it up and went for the 20mile drive

10miles in i thought I'd check it over. Mainly the coolant

Few pics

For back and dropped the oil. Money down the drain came to mind here. Lol

Fresh stuff and filter

Back in the garage till tomoz

Part number for future reference

 

[mc funbot]

I did a 1000 mile run in.. Used piss thin oil started her up dropped it out. Filled up with new filter as well had a drive nothing over 3k few weeks then dropped oil and put 5-30 fully in it and then clocked up the miles.. When I did the head the other week pistons looks spot on VAS did a good build!!

 

[Chambers_CUPRA]

Had the car smoke tested tonight

Resulted in this

Turns out the standard Ibiza injector seal doesn't wanna seal my BAM injectors. So gotta order some new ones tomoz.

And higher the front end up for its date Saturday

 

[yellonvi-R]

Mapping on rollers.

 

[mc funbot]

Where did you get it smoke tested I need both my cars doing?

 

[Chambers_CUPRA]

Mapping on rollers.

Yup

Where did you get it smoke tested I need both my cars doing?

A mate of mine does it. 20 quid a car.

 

[R4cup]

Good luck on the rollers mate

20 quid smoke test is well worth it