The correct way to do an N249 bypass the full guide

[mc funbot]

Send me a pic of the bay I think they are pretty much the same lay out.

 

[laurencesmith]

Im from notts and wouldn't mind having this done on my lcr if we sorted some cash out would you be interested in doing the n249 and the two others mentioned on mine at some point and maybe we could use mine as the guide for pictures as well?

 

[mc funbot]

Yes mate I spend quite a bit of time in notts anyway mate so we can do indeed..do I need to bring tools? You want n249 n112 and SAI?

 

[laurencesmith]

That's perfect then well I've got a few bits but nothing major so probably be best if you bought the bits that you know you deffo need that way we can't go wrong lol did you wanna send me your number over inbox and I'll text you and get it sorted?

 

[mc funbot]

You have been in boxed buddy.

 

[DuamoLCR]

You could make a bit of money doing these!


Sent from my iPhone using Tapatalk

 

[mc funbot]

You could make a bit of money doing these!


Sent from my iPhone using Tapatalk

When you coming for me to do yours? I'm free all week pretty much.

 

[DuamoLCR]

Flat out all week mate unless you can do an evening?


Sent from my iPhone using Tapatalk

 

[laurencesmith]

Mate I haven't got your inbox? Am I allowed to post my mobile number on here? I'll do it just hope I don't get told off lol 07854786642

 

[mc funbot]

Flat out all week mate unless you can do an evening?


Sent from my iPhone using Tapatalk

Evening is fine mate not a problem at all.

 

[DuamoLCR]

Ill PM you .your a ledge


Sent from my iPhone using Tapatalk

 

[mc funbot]

No problem mate. My inbox is being a pain. Fingers crossed i get it.

 

[alex sfu]

just done the n249 took approx 30 mins great guide i took it for a quick spin and it does responds much better and the dv is louder now too will be do the rest this week aswell

 

[domin8or]

I have a previous version of this done,but would like all the excess piping removed from under inlet.
On my set up (as pic) there's a pipe connecting in the FPR with a T piece which you don't mention,it can be seen on my pic as all blue silicone. Silicone that drops under manifold is connected to nipple on inlet as yours.

 

[P6THX]

This may have already been asked so apologies... But what does this mod actually do? I see its very common.


Dave

 

[P6THX]

Also do u need to buy anything for it?
Do u need any supporting mods as all i have is a 007p dv and stage 1 map...?


Dave

 

[mc funbot]

Hey buddy you only need about 1 meter of vac pipe can get it of eBay that's all you will need. And just follow the guide.

 

[mc funbot]

I have a previous version of this done,but would like all the excess piping removed from under inlet.
On my set up (as pic) there's a pipe connecting in the FPR with a T piece which you don't mention,it can be seen on my pic as all blue silicone. Silicone that drops under manifold is connected to nipple on inlet as yours.

You just need 1 bit of pipe from inlet to FPR and one from the other inlet nipple to the DV. If you have a boost gauge use a T of the FPR has the best vacumn. Dose that help mate.

 

[P6THX]

You just need 1 bit of pipe from inlet to FPR and one from the other inlet nipple to the DV. If you have a boost gauge use a T of the FPR has the best vacumn. Dose that help mate.

Thanks mate, excuse my ignorance in new to the whole lcr and turbo stuff lol. Ive come from a n/a astra! Lol. What is an FPR?


Dave

 

[P6THX]

Also what width is the vacuum pipe?


Dave