K04 MK3 Ibiza Cupra Track Ready - RIP

[Chambers_CUPRA]

that down pipe looks huge the welds are rather ugly on it too although as long as they seal it i dont suppose it matters too much.
i thought flat shifting and launch control could only be done on the lcrs ecu would be mental on the road if that can be done to a mk3 cupra.
makes me want a 1.8t again even more

It is huge haha. True about the welds tho. But this gives me a good starting point and hopefully should save me alot of ttime and hassle.

Least i know it fits a mk3. So i could just give it someone to start fresh rather than mock it, offer it up, tack weld, offer it up again and all that crap lol

Think they can map it in to anything sure theyve done deisels with launch control.

 

[Ginge81990]

Im pretty sure they can't do launch control or flat shift on pre 2001 cars cause the ecu is different. I know that's the case on s4s

Sean's Xperia arc

 

[Chambers_CUPRA]

Im pretty sure they can't do launch control or flat shift on pre 2001 cars cause the ecu is different. I know that's the case on s4s

Sean's Xperia arc

Duno now hahq

There site just says 1.8t/2.0tsi launch control 85quid lol

 

[Chambers_CUPRA]

http://m.youtube.com/watch?v=9JYJCuvhn4Y

 

[Chambers_CUPRA]

Fitted a new temp sensor finially. Thought id better as i drove to brum and back and the needle didnt evem move lol

Dont think mine had ever been changed lol defo looks old

Pulled my LSD box out tonight gunna start striping it and painting it tomoz

Also got a little heater to keep me warm

Tiny but packs a punch

 

[Chambers_CUPRA]

Got a new release bearing for the box today

Whipped the fork off and relpaced it

Stripped off the selector, slave cyclinder and gearbox mount bracket to give it a lick of paint sometime soon too

 

[hixonseatboy]

Looking good mate I always Wounder with these boxes do you lose oil with no shafts on?

Bet you can't wait to get this box fitted. Will sure make you car even more fun

 

[chriscupra02]

Looking nice mate what injectors you gona be running

 

[Chambers_CUPRA]

Looking good mate I always Wounder with these boxes do you lose oil with no shafts on?

Bet you can't wait to get this box fitted. Will sure make you car even more fun

Thanks mate. Nah cant wait haha next week maybe

There a sealed box so dont lose any oil which is good as the oil for the LSD i believe is well expensive but makes the box heavier lol

Looking nice mate what injectors you gona be running

Thanks mucka

Ive got LCR 225 injectors to start woth at least. what you running? And did alex get them or did you source them?

 

[CupraSean]

****** can do launch control but won't do it without you having unrated rods.

 

[Chambers_CUPRA]

Just say yes haha

 

[yellonvi-R]

Get the grinder out and smooth the joins.

 

[chriscupra02]

Thanks mate. Nah cant wait haha next week maybe

There a sealed box so dont lose any oil which is good as the oil for the LSD i believe is well expensive but makes the box heavier lol



Thanks mucka

Ive got LCR 225 injectors to start woth at least. what you running? And did alex get them or did you source them?

I'm gona be useing 550's for the minute and yeh alex got them and at a good price.

 

[Chambers_CUPRA]

Get the grinder out and smooth the joins.

Aint worried that much i just wrapped. Just not dodgey lol

 

[Chambers_CUPRA]

I'm gona be useing 550's for the minute and yeh alex got them and at a good price.

What was you running on your k04? Guess bam ones?

Wonder what they'd max out at

 

[yellonvi-R]

Yeah that was dodgy lol, this ran 470cc injectors so you have a few options there, your lcr ones should be plenty.

 

[R4cup]

I think for where your heading BAM ones may not be enough ;-)

 

[yellonvi-R]

Arnt the lcr ones good enough for 300-320bhp? Dont think theyll be much more than that running here......

 

[Chambers_CUPRA]

I think for where your heading BAM ones may not be enough ;-)

Arnt the lcr ones good enough for 300-320bhp? Dont think theyll be much more than that running here......

 

[Chambers_CUPRA]

Lick of paint