D.K's LCR, #Projectcarbon. Still alive
- Thread starter D.K
- Start date
Ah see I don't see the point in getting the rears on there own lol but there going to look good , my mate hired a big wet vac and the amount of dirt that came out the seats was unreal
Will keep you posted
Will keep you posted
darren used a vax on my seats a couple of months ago and they cam eup a treat nice buy , shame about the splitter
nice buy , shame about the splitter 
Are you sure it's water stains on those seats? Lol
Shame about the splitter mate. Time to get that V3 splitter ready and fitted. Still loving mine and it isn't even finished off yet
Shame about the splitter mate. Time to get that V3 splitter ready and fitted. Still loving mine and it isn't even finished off yet
Ouch on the splitter mate, another one to come along?
Front seats look like a great edition they'r so much better than the other ones, when I drove Kats car I couldn't believe how much better they are
Front seats look like a great edition they'r so much better than the other ones, when I drove Kats car I couldn't believe how much better they are
I have got another one on the go mate, I just need to order some more carbon and then find some time to finish it.
I cant wait to get the Recaros in
Cheers mate
I'm hoping to get to a few shows next year plus the AmD Rolling Road days.
The cars not been feeling right for a while now so with El's help yesterday we ran a few log's, TBH I dont understand any of what we did all I know is I had to thrash the nut's off my baby The one thing I was worried about was that it seemed to be running a bit rich, thankfully the logs showed that the fuel trim's are fine but during the logs we did find another problem, after 5k the car seems to loose boost and power then regain it again up to the limiter, on another run the boost cut in and out several time's between 5k and the limiter. I dont normally drive the car in that rev range so I've not noticed it before. We had a quick check around the bay and we did find a couple of loose breather hoses which I'll hopfully get sorted next weekend, I've also got the Forge breather hoses that sit under the inlet manifold to go on that I've had for ages, hopfully it is just a loose hose somewhere as the other thing we're thinking it could be is the actuator 
As it was too cold to do any engine work today I decided to have a look at the Recaro's.
I wanted to find out why the driver's lower right bolster was so lumpy so I set about taking the seat apart.
This is what I found
I anyone else takes a seat apart what ever you do dont remove the seat hight adjustment assemble, it's a pig to get back on.
So know I've striped the base down I'll order a new base cushion and rebuild it all then get the covers wet vac'd.
Part No 1J0881375P
The one thing I was worried about was that it seemed to be running a bit rich, thankfully the logs showed that the fuel trim's are fine but during the logs we did find another problem, after 5k the car seems to loose boost and power then regain it again up to the limiter, on another run the boost cut in and out several time's between 5k and the limiter. I dont normally drive the car in that rev range so I've not noticed it before. We had a quick check around the bay and we did find a couple of loose breather hoses which I'll hopfully get sorted next weekend, I've also got the Forge breather hoses that sit under the inlet manifold to go on that I've had for ages, hopfully it is just a loose hose somewhere as the other thing we're thinking it could be is the actuator As it was too cold to do any engine work today I decided to have a look at the Recaro's.
I wanted to find out why the driver's lower right bolster was so lumpy so I set about taking the seat apart.
This is what I found
I anyone else takes a seat apart what ever you do dont remove the seat hight adjustment assemble, it's a pig to get back on.
So know I've striped the base down I'll order a new base cushion and rebuild it all then get the covers wet vac'd.
Part No 1J0881375P
Lol about the seats haha , also your noisy issue will be all the Pcv hoses split under the manifold if you want a hand fitting them drop me a txt there fiddly but I've done them a few times
Got to love a good bodge job lol
Let get the engine checked and sorted so it's running as it should. Then go for some more logs as I know you loved it
Let get the engine checked and sorted so it's running as it should. Then go for some more logs as I know you loved it
Yas I found it!! Been looking for this pic since I finished work. Mmmmmm I think I may just have to get one
You should of said mate and I'd of posted it for you The R32 wheel is really nice, much nicer to hold than the normal 225 wheel.
Do you want me to go looking for you again
Haha I was thinking that but tbh trawling thru your thread is fine as plenty of pretty pictures for me.
That's what I like to hear I think it looks alot more classy as well.
No need iv got a mint one lined up back in Scotland (unless you can beat £130) which I think seems fair
That's what I like to hear I think it looks alot more classy as well.
No need iv got a mint one lined up back in Scotland (unless you can beat £130) which I think seems fair
Similar threads
