what have you done to your car today ?

[Gaz861]

Nothing due to eml on got poorly girl

 

[Brettyboy]

I'm not sure on that ,but when I spoke to robdon he told me that you need headlight washers for h.i.d's and soon this side of the border vosa are going to be clamping down on this area too so if your car has h.i.d's and they don't have washers and auto leveling it will be an m.o.t. failure. I don't know how the old jap cars imported with h.i.d's are gonna get round this?, but someone will.

If you get the 4300k they will as they give a natural bright light,ppl go for 6000 & 8000k which give of a bluey colour,also i got H7R hid bubs which are non dazzle

 

[LEE69]

Yes hids pass the mot

 

[Dozer360]

I'm not sure on that ,but when I spoke to robdon he told me that you need headlight washers for h.i.d's and soon this side of the border vosa are going to be clamping down on this area too so if your car has h.i.d's and they don't have washers and auto leveling it will be an m.o.t. failure. I don't know how the old jap cars imported with h.i.d's are gonna get round this?, but someone will.

hids need auto leveling, projector lenses and washers fitted as you said, imports and other cars that have them fitted as standard should be ok

 

[RICKY3]

Ordered Ultra Power h7 bulbs


Sent from my iPhone

 

[csd_19]

hids need auto leveling, projector lenses and washers fitted as you said, imports and other cars that have them fitted as standard should be ok

FFS

Not this again


http://www.seatcupra.net/forums/showthread.php?t=336417


Or has something changed?

 

[taff141177]

Finally fitted my braided hosing where my old fuel pipes used to be and what a tw*t the clips were to get off

 

[nd-photo.nl]

Installed red led strips, absolutely love it


BeenverlichtingInbouwen_NDPHOTO_20121014_010 by ND-Photo.nl, on Flickr


BeenverlichtingInbouwen_NDPHOTO_20121014_012 by ND-Photo.nl, on Flickr

 

[Adam+Rhi]

well i replaced yet another ignition coil and found out i need new rocker cover seals, didnt realise there is also one inside to go around the coils or spaks whatever. got tol thats possibly leaking and making oil run under the coils which is why they keep blowing.

but on the plus side i fit my fly eye tints

BEFORE:

[/IMG]



AFTER:

[/IMG]

 

[RaviR50]

well i replaced yet another ignition coil and found out i need new rocker cover seals, didnt realise there is also one inside to go around the coils or spaks whatever. got tol thats possibly leaking and making oil run under the coils which is why they keep blowing.

but on the plus side i fit my fly eye tints

BEFORE:

[/IMG]



AFTER:

[/IMG]

Are they easy to install?? Im thinking about doing that but getting the glossy looking ones for the rear and front

 

[Adam+Rhi]

I would say they are fairly easy to install...the only hard part for me was when you try to take the film around the curve of the lights.....when you do that the film bends and creates potential creases so its a case of taking your time with it.

not going to lie it took me about an hour and a half purely because i wanted them perfect i do have ever so slight crease but they arent noticable unless your nose is on the lights

 

[taff141177]

I would say they are fairly easy to install...the only hard part for me was when you try to take the film around the curve of the lights.....when you do that the film bends and creates potential creases so its a case of taking your time with it.

not going to lie it took me about an hour and a half purely because i wanted them perfect i do have ever so slight crease but they arent noticable unless your nose is on the lights

.


Looks smart mate especially if your going for a stealth look

 

[taff141177]

I would say they are fairly easy to install...the only hard part for me was when you try to take the film around the curve of the lights.....when you do that the film bends and creates potential creases so its a case of taking your time with it.

not going to lie it took me about an hour and a half purely because i wanted them perfect i do have ever so slight crease but they arent noticable unless your nose is on the lights

Just out of curiosity did you get the stuff of eBay for a tenner or the more expensive stuff ?

 

[RaviR50]

I would say they are fairly easy to install...the only hard part for me was when you try to take the film around the curve of the lights.....when you do that the film bends and creates potential creases so its a case of taking your time with it.

not going to lie it took me about an hour and a half purely because i wanted them perfect i do have ever so slight crease but they arent noticable unless your nose is on the lights

They look good mate are they dark or light??

 

[Chris4877]

Installed red led strips, absolutely love it


BeenverlichtingInbouwen_NDPHOTO_20121014_010 by ND-Photo.nl, on Flickr


BeenverlichtingInbouwen_NDPHOTO_20121014_012 by ND-Photo.nl, on Flickr

What are them white patches in your drivers footwell :w4nk: haha

 

[Adam+Rhi]

They look good mate are they dark or light??

Think they are dark..i mean the film was black but because its perforated vinyl it makes it look a bit more subtle.

 

[nd-photo.nl]

What are them white patches in your drivers footwell :w4nk: haha

I looooovvvveeee my car

 

[Chris4877]

I looooovvvveeee my car

 

[akchappers]

Prepping for mot on Friday! Gulp!
Ak

 

[bishy]

Swapped the old forge split-r on the stage 2 lc for a new 007p with a yellow spring and 1 shim. Holds boost loads better!