what have you done to your car today ?

[Brettyboy]

Noticed o/s/f tyre has a screw in it & n/s/f tyre has a nick in the side wall,lucky there getting low cos looks like new front tyres going on tomaro morning

 

[Brettyboy]

Fittted my coilovers

[/IMG]

That looks sweet,can't wait to get my coilovers fitted

 

[turboboy]

I think it needs to go about a inch lower lol.

Back is as low as it will go,I have 10mm adjustment on the front.

A LCR splitter would last approx 10mins lol,actually I wouldnt get it off my drive

 

[Murdered LCR]

Fitted my cage more pics in link below

 

[ReDBull]

Back is as low as it will go,I have 10mm adjustment on the front.

A LCR splitter would last approx 10mins lol,actually I wouldnt get it off my drive

That's a nice looking car

 

[ReDBull]

Fitted my cage more pics in link below

Are you keeping the strut braces in place as well?

 

[Murdered LCR]

Yes think so mate , loads more to do two door bars and another rear brace for the belts

 

[ReDBull]

Are you still spraying it orange?

 

[Murdered LCR]

Yep every things going orange , still needs welding in tho

 

[aaron-gardner]

Back is as low as it will go,I have 10mm adjustment on the front.

A LCR splitter would last approx 10mins lol,actually I wouldnt get it off my drive

I'm sure you realise I was joking lol. What coilovers you using? I'm hoping Jom because I know they have one of the lowest drops and that's what I have got to fit on mine soon. Did you need different arb links to stop the drive shaft bottoming out? It does look awesome tho. It's lower than my m8s mk3 gti golf so he won't be happy if I go that low lol.

 

[turboboy]

I'm sure you realise I was joking lol. What coilovers you using? I'm hoping Jom because I know they have one of the lowest drops and that's what I have got to fit on mine soon. Did you need different arb links to stop the drive shaft bottoming out? It does look awesome tho. It's lower than my m8s mk3 gti golf so he won't be happy if I go that low lol.

It's on jom mate, has the adjusters taken out at the back.. Needed a larger looped arb this is a must,my driveshaft and arb where touching. There isn't a lot of ground clearance lol.. I am running 225/35/18 tyres though,would rub on 40profile tyres I think

 

[macieqq01]

bought new alloys and tyres

 

[Dozer360]

washed, waxed, and t-cutted the whole car, cleaned the alloys and dressed the wheels

 

[BenG]

Removed all four wheelarch liners and cleaned the cack out from behind them ('04 Leon).

There were a few seedlings sprouting from the crud behind both front wheels!

Top tip: Check yours and clean them out before muck turns to rust....

 

[aaron-gardner]

It's on jom mate, has the adjusters taken out at the back.. Needed a larger looped arb this is a must,my driveshaft and arb where touching. There isn't a lot of ground clearance lol.. I am running 225/35/18 tyres though,would rub on 40profile tyres I think

Ahhh good to know. Well at least I know what I'll need. Fair play tho it does have a awesome stance. Didn't think the Leon could look that good

 

[turboboy]

Ahhh good to know. Well at least I know what I'll need. Fair play tho it does have a awesome stance. Didn't think the Leon could look that good

thanks.. I've spent a fair bit on it and put a lot of hard work in over the past two months so all the nice comments make it worth it.

 

[macieqq01]

Bought new coilovers

Sent from my GT-I9100 using Tapatalk 2

 

[krisby]

Chucked some Kumho Ecsta KU31s on the front. Much better than the crappy Triangle Talon sports they came with. There was nothing sporting about the old boots, apart from the tread pattern, recylcled plastic does not a good tyre make.

 

[nd-photo.nl]

Fitted a shorter Powerflex exhaust mount, backbox sits better now.


Powerflex Universal Exhaust mount by AndyRamdin / ND-Photo.nl, on Flickr


Before & After mount by AndyRamdin / ND-Photo.nl, on Flickr


Before & After shorter Powerflex by AndyRamdin / ND-Photo.nl, on Flickr

 

[LEE69]

Loads better