Team GTR - Leon Cupra R

[EL]

looking good mate, I hope tomorrow is a good day for you all.

Cheers mate. Shame your not making it. Need to make sure there's another meet more central for people to get to!!

 

[RDS]

I'm hoping to make it down next year. There seems to be a massive LCR scene down south.

 

[t0m]

Looking bang tidy mate

Will see you in the morning with DK

 

[EL]

Looking bang tidy mate

Will see you in the morning with DK

Cheers dude. See you in the morning

 

[EL]

Had a great day at the AmD Rolling Road event yesterday. Great bunch of people there. Great drive to and from the event with D.K and t0m, couple of the best LCR's in my opinion. Seeing these two cars rolling & then parked next to mine have given me a lot of ideas for mine so need to get cracking!!

Very happy with the car's performance. Guys checked it over for me and all seems to be ticking over nicely. Results on the rollers were very good also. When the car was mapped it was on a extremely hot day and AmD dd say that the car would run better figures on a cooler day and they weren't kidding. Car ran 288bhp, 313lb/ft What I am particularly happy with is the smoothness of the graph and how torque is held as opposed to spiking and dropping off quickly. Took a couple of guys for a spin and they too were impressed which is always a bonus

Here are a couple of pics taken on my iphone. I will take a pic of the graph so you can see what I am mumbling on about.

Video of the rolling road, again on the iphone but you get an idea on how the car sounds on full power


There are some really nice pics taken by a few other SCN members on proper cameras so I will get them on here with a big thanks to the guys

 

[drka-drka]

Phew there goes my morning. Just spent the morning going back and forward reading this whole thread start to finnish.

Cracking LCR, good thread lots of tech stuff which iv learned a bit off. Lack of pics tho

Keep it up, dare say im thinking of using that exhuast place in brum looks good

 

[EL]

Phew there goes my morning. Just spent the morning going back and forward reading this whole thread start to finnish.

Cracking LCR, good thread lots of tech stuff which iv learned a bit off. Lack of pics tho

Keep it up, dare say im thinking of using that exhuast place in brum looks good

wow I am impressed. Well see it as payback as I've had to do it to your sexy readers ride thread

Thanks for the comments mate, appreciate it. Makes it even more worth it when you get some good feedback. Yeah the guys at Midlands Exhausts are all good. Give them a shout and see how you get on really.

I will have to make sure there are plenty more pics from now on. Problem is, I tend to forget the camera when we get stuck into doing the work

 

[t0m]

Nice write up mate. Was a great day out in the LCR's!!

Your car goes really well and sounds mint!!

Thanks for the compliment aswell bud

 

[EL]

Nice write up mate. Was a great day out in the LCR's!!

Your car goes really well and sounds mint!!

Thanks for the compliment aswell bud

Cheers matey Need to compliment where it's due. Can't wait to see yours with the poly bushing all done. Brands Hatch is a must!!

 

[t0m]

Cheers matey Need to compliment where it's due. Can't wait to see yours with the poly bushing all done. Brands Hatch is a must!!

Cheers bud. It's getting there...

I was loving the bay on yours, the brace and the coolant covers etc were tasty. There are bits I see on alot of other cars which I still want, lol.

Polybushing is happening early December, can't wait mate! 1st it's time to kill off this stupid knock sensor fault once and for all. Going AmD on the 8th November to have it replaced at long last. Then it's bush time and front ARB JOY!!! Lol.

What's the plans ahead for yours?

 

[EL]

Cheers bud. It's getting there...

I was loving the bay on yours, the brace and the coolant covers etc were tasty. There are bits I see on alot of other cars which I still want, lol.

Polybushing is happening early December, can't wait mate! 1st it's time to kill off this stupid knock sensor fault once and for all. Going AmD on the 8th November to have it replaced at long last. Then it's bush time and front ARB JOY!!! Lol.

What's the plans ahead for yours?

Sounds good mate. I'm at AmD's tomorrow hopefully getting a few maintenance bits done to keep it ticking over nicely. Will get them to give the car a good check over and let me know what areas they believe I should look at. After that I want to do some subtle cosmetic pieces here and there as I have got a few ideas now since the meet. Then I will see how I get on, knowing me I will want to do more to the car but then where do you stop!!!

Planning some track day trips for next year as well as the usual trips to Santa Pod and maybe some other shows like Inters................aka the posing shows

 

[D.K]

Found some

 

[GTi T]

Great results mate, looks lovely too! keep up the good work!

Tom

 

[t0m]

Sounds good mate. I'm at AmD's tomorrow hopefully getting a few maintenance bits done to keep it ticking over nicely. Will get them to give the car a good check over and let me know what areas they believe I should look at. After that I want to do some subtle cosmetic pieces here and there as I have got a few ideas now since the meet. Then I will see how I get on, knowing me I will want to do more to the car but then where do you stop!!!

Planning some track day trips for next year as well as the usual trips to Santa Pod and maybe some other shows like Inters................aka the posing shows

Nice one mate. Can't beat a good healthcheck on the car and advice from them to see if anything you wouldn't normally check - is on it's way out etc. Always a good idea to have this sort of thing done before the winter really sets in aswell.

Looking forward to your ideas mate! And think I'll join you in the shows, whether mine gets on track in the end is another question lol. She has to be ready and I want to get her an LSD now haha!

Just seen the pics above and the car looks lovely mate!

 

[EL]

Found some

F'in awesome mate, appreciate the pics massive man hug when I next see you

 

[EL]

Great results mate, looks lovely too! keep up the good work!

Tom

Thanks matey. We need to arrange a meet which we are both at. Need to see your ride. Bet it's coming along nicely now!

 

[EL]

Nice one mate. Can't beat a good healthcheck on the car and advice from them to see if anything you wouldn't normally check - is on it's way out etc. Always a good idea to have this sort of thing done before the winter really sets in aswell.

Looking forward to your ideas mate! And think I'll join you in the shows, whether mine gets on track in the end is another question lol. She has to be ready and I want to get her an LSD now haha!

Just seen the pics above and the car looks lovely mate!

Haha the list never ends mate. Ooooooooo LSD.....droooool!! Thanks mate, Darren works that camera nicely don't he

 

[J@mes W]

Nice to meet you yesterday mate You exhaust made my mind up about getting a custom exhaust, think i may have to get the same one. Midland exhaust... where are they? EDIT just found them.

Could you PM me your account number and sort code and i'll transfer you that money tomorrow lunchtime.

 

[EL]

Nice to meet you yesterday mate You exhaust made my mind up about getting a custom exhaust, think i may have to get the same one. Midland exhaust... where are they? EDIT just found them.

Could you PM me your account number and sort code and i'll transfer you that money tomorrow lunchtime.

Hi mate. Great to meet you also, sorry I was a bit slow at the beginning figuring out who you were...........was way too early for me lol

Good stuff dude. Really liking your car and the plans. Midlands Exhaust are an option but there's also another one close by as well. Il find out who they are and what they like. One of the Cupra guys I was chatting to was telling me about them so I will keep you posted

 

[t0m]

Haha the list never ends mate. Ooooooooo LSD.....droooool!! Thanks mate, Darren works that camera nicely don't he

Think it will get done eventually bud!!