-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
D.K's LCR, #Projectcarbon. Still alive
- Thread starter D.K
- Start date
I had another go at makeing the Jetex fillter look a bit more attractive in the engine bay today and failed, so I'v gone back to my modded airbox, I also drilled a few more holes in the bottom of the airbox to try and add a bit more induction noise 
On a more concerning note when I removed the Jetex there was quite a lot of dirt partical's sitting in the TIP
unfortunatly I did'nt take any pictures but Jonjay was there to witness the amount of dirt that was there and we were both suprised, Looking at the fillter from the insdie out you can see a lot of light passing through the fillter so it's easy to see why it let so much dirt through,
So moral is an open cone may let more through but at what cost
On a more concerning note when I removed the Jetex there was quite a lot of dirt partical's sitting in the TIP
unfortunatly I did'nt take any pictures but Jonjay was there to witness the amount of dirt that was there and we were both suprised, Looking at the fillter from the insdie out you can see a lot of light passing through the fillter so it's easy to see why it let so much dirt through, So moral is an open cone may let more through but at what cost
We didn't take any pictures - I was busy debadging and Darren was painting calipers so we forgot.Really?
Can we have pictures Darren? This sounds like bad news for all those Jetex owners!
We wnet for a bit of a drive today and the car does feel less punchy with the airbox back on This is a big dissapointment in 2 way's, firstly I really did'nt like the look of the open cone and secondly I a bit worried now about fitting a cone that will let dirt into the Turbo, I might have to have a look into getting an Apexi daul cone, I have heard some good things about them and Jonjay has one so it's got to be fairly good
This is a big dissapointment in 2 way's, firstly I really did'nt like the look of the open cone and secondly I a bit worried now about fitting a cone that will let dirt into the Turbo, I might have to have a look into getting an Apexi daul cone, I have heard some good things about them and Jonjay has one so it's got to be fairly good
I got one to mate, had no problems and it seems to filter well
I think you have prob seen this already but just incase
http://www.mkiv.com/techarticles/filters_test/2/
I think you have prob seen this already but just incase
http://www.mkiv.com/techarticles/filters_test/2/
I have a hks mushroom filter can't knock it really much better than the bmc may get an apexi but got other things to get 1st
I got one to mate, had no problems and it seems to filter well
I think you have prob seen this already but just incase
http://www.mkiv.com/techarticles/filters_test/2/
Yeah that was the one I saw,
There was one on here for sale but I think it's gone
http://www.nengun.com/apexi/power-intake-replacement-filter-and-adapter
bingo for the 80mm apexi filter
bingo for the 80mm apexi filter
Similar threads
