-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Those lights look the nuts how hard is to get the film on the lights with out getting air bubbles etc ? , I also have those center caps altho I have the carbon fiber set , still haven't fitted them tho may do it on the weekend
As long as you have a hair dryer to hand the film goes on pretty easily. They say that any small bubbles will disappear after a few days as the film is actually porus, so I hope they're right as I have one or two bubbles that will be annoying me if they don't go!
And I haven't fitted the centre caps to my OEM alloys yet either
I have just fitted mine today lol look quite good as it goes , hmm ok may have to get some film have they got a web site or did you order it from some where else , also what shade of tint is it ,
look quite good as it goes , hmm ok may have to get some film have they got a web site or did you order it from some where else , also what shade of tint is it ,
I have just fitted mine today lol
Yeh, I kind of wish I'd seen the carbon ones before I ordered mine.
The website is www.lamin-x.co.uk
Mine are the "subtle tint" 12" x 24" which is just enough to do both lights.
If you put "civinfo" into the discount code box you'll get 10% off!
So today the car was prepared for my next track day at Snetterton next Friday. A bit early I know, but I'm crazy busy with work at the moment so had to fit it in as and when.
I have found a great little garage near me Carrera Engineering, and as the name suggests they are really a Porsche specialist but he deals with all German marques and seems pretty clued up on the VAG range and most importantly the MK4 Golf platform.
So the car went to him last night and today he carried out primarily an oil change and brake fluid change. I also asked him to give the car a once over bearing in mind the impending track day and gave him the track settings for the KWs so he could adjust them while it was up on the ramps. He fitted my track wheels and tyres, regassed the aircon and fitted a carbon filter and finally fitted my Silicon TIP that's been sitting in my garage for 6 months!
All at a very reasonable price and done by a very decent bloke who, like me, could talk about cars all day long!
Apart from going up to Jabba for routine work and tweaks I normally do this kind of stuff myself but I'm just so busy at the moment I couldnt see how I was going to get this all done in the next week, so I'm happy to have found a local chap who I can trust. They seem to be rare.
Thanks to DannyC87 on here for pointing me in the right direction I also now have my Hague Camcorder headrest mount, so I will try and get some footage of Snetterton up on here after next Friday, (if I don't run out of computing talent in the process and balls it up!)
The car looks and feels so much better with the Pro Race 2.1s on. Very happy with it at the moment. Roll on Next Friday
I have found a great little garage near me Carrera Engineering, and as the name suggests they are really a Porsche specialist but he deals with all German marques and seems pretty clued up on the VAG range and most importantly the MK4 Golf platform.
So the car went to him last night and today he carried out primarily an oil change and brake fluid change. I also asked him to give the car a once over bearing in mind the impending track day and gave him the track settings for the KWs so he could adjust them while it was up on the ramps. He fitted my track wheels and tyres, regassed the aircon and fitted a carbon filter and finally fitted my Silicon TIP that's been sitting in my garage for 6 months!
All at a very reasonable price and done by a very decent bloke who, like me, could talk about cars all day long!
Apart from going up to Jabba for routine work and tweaks I normally do this kind of stuff myself but I'm just so busy at the moment I couldnt see how I was going to get this all done in the next week, so I'm happy to have found a local chap who I can trust. They seem to be rare.
Thanks to DannyC87 on here for pointing me in the right direction I also now have my Hague Camcorder headrest mount, so I will try and get some footage of Snetterton up on here after next Friday, (if I don't run out of computing talent in the process and balls it up!)
The car looks and feels so much better with the Pro Race 2.1s on. Very happy with it at the moment. Roll on Next Friday
Sounds good Rob. I'm going to pop down on Friday and try and get my car noise tested to see if it is still track legal, not doing the track day though due to no funds! I'll come and say hello, do you need any tools etc bringing along?
Be good to meet you Danny. Don't think I'll need anything, there's 3 of us coming with cars plus 2 or 3 passengers so between us we should be ok. Thanks for the offer though.
See you Friday
We've got a joint owned E36 328i coupe trackday car which is a laugh to say the least. All stripped out etc etc. And a Porshe 993 C2 which is a new acquisition for a mate of mine and I think will be pretty evenly matched to the LCR. Well, on paper it is anyway, and for what he gains on me with rear wheel drive hopefully he'll lose against my R888s! Not that it's a race or anything
We've got a joint owned E36 328i coupe trackday car which is a laugh to say the least. All stripped out etc etc. And a Porshe 993 C2 which is a new acquisition for a mate of mine and I think will be pretty evenly matched to the LCR. Well, on paper it is anyway, and for what he gains on me with rear wheel drive hopefully he'll lose against my R888s! Not that it's a race or anything
Awesome.. should be a good day for you! I have a quick look at my lap times from my last trackday there..not a competition or anything
This picture confuses me, how come your top drivers side grill is painted on one side?
Oh, and fantastic car mate looks really clean and smart with subtle mods
This picture confuses me, how come your top drivers side grill is painted on one side?
Oh, and fantastic car mate looks really clean and smart with subtle mods
It's not painted I think that's just reflection of some kind.
Glad you like it. Thanks
What figures is your car making now Willie? Did you have it on the rollers when it was mapped?
Not too sure about figures TBH.
It's flowing 210 g/s at the MAF which is about 260 BHP.
I'm going for torque more than BHP.
I'm going for rev 2 tomorrow which will give more torque between 3 and 5,000 RPM
Will be on a RR some time but not in the near future
Similar threads
