Yeah I agree...But He has **** all room to work with...Its just missing the rear engine mount and i mean just missing it...about 1/2 maybe 1'' at a push...
Yup...Full 3'' system ftw
-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
Yeah I agree...But He has **** all room to work with...Its just missing the rear engine mount and i mean just missing it...about 1/2 maybe 1'' at a push...
Yup...Full 3'' system ftw
my dp was about 2mm away from the mount on my old k04 setup. and about 10mm on the gt30 iirc. sounds like you got loadsa room
Fooking lol...
10mm isn't Much room to me lol
...Should sound alright with a Full 3'' system no cat & No silencer ...Nice little burble
Reckon that unless you're Max Powa you'll get ****ed right off with that racket by the end of the road. Assuming you have no silencing?
Well thats me..
Spoke to him this morining were using my orignal Backbox Larger Milltek one and he's gonna weld in a small Silencer to help it out..
As he said it would be Uber loud on the motorway...Should be picking it up 2morro..
i had a 3"dp on my gt28 with no cat or centre silencer just a backbox and it made hell of a racket and was only on the car for 3 months before the baffles came out u have 2 have the radio on blasting 2 hear anythin from it and 2 have a chat lol forget it (plus the neighbours were gettin well p****d off with me comin home early hours of the mornin and waking the street up) so i now have a new exhaust but with a small centre box in now and still makes the same racket on boost but like a mouse while drivin around town much better i think
Yup thats why im using the milltek backbox as its quiet on normal driving but is loud on boost
jamiebennett81
Guest
well done, all coming together now Danny
although if it was me, running an unsilenced exhaust on that sort of power, it would get right on my tits!!
although if it was me, running an unsilenced exhaust on that sort of power, it would get right on my tits!!
it did with me anyway it was good at first could hear it miles away and motorway drivin ffs to loud and when i ripped the interior out a few days b4 i had the new exhaust fitted it was deffening and it was poppin and bangin goin down the slightest downhill slope lol much better now tho still pops and bangs but not as much and can go home without the neighbours givin me stinkin looks lol
keep up the good work m8 altho from comin on here ive realised you'll prob get bored about a week after u have it on the road and will prob swap the turbo for another lol
keep up the good work m8 altho from comin on here ive realised you'll prob get bored about a week after u have it on the road and will prob swap the turbo for another lol
Last edited:
that makes more sense! I thought (like hooch) that you weren't running anything other than 3" pipe.
Sorry Mork...My Bad..Nah I do like a Noise Exhaust but not that noise would be louder than my Mates Zilla 20g scoob and thats Fooking noisy...
Just got back in went up to have a look the Bell Housing on the Downpipe flange Is ''JUST'' Missing the Rear Engine Mount...Id say around 3-4mm..
So once its up and running im gonna Source a place to cermaic Coat My Downpipe & de-cat plus Manifold Too...
As he's got a A4 IHI and he was Saying the Thermostatic Temp thats comes off the Turbo,Block,Manifold & downpipe is Unreal...
Im just abit Cautious about the rubber Engine Mount.It isn't Right near it But @ 800c its gonna be abit warm down there...
Havn't Updated my thread for a while...
My Full 3'' System Is nearly ready....
Got off the phone early with craig and hes nearlly Finished my Downpipe...But it was gobsmacked How lack of room he had to work with next to the Rear Engine mount...
Anyway this is the downpipe tacked together and he's making my 3'' system with No silencer up 2morro...Im over the moon with it..
Also My Front bumper is in the final stages of prebing just need some Gold smiths fine stopper then its gettin Primered and Keyed...
Piccys to follow..
My Full 3'' System Is nearly ready....
Got off the phone early with craig and hes nearlly Finished my Downpipe...But it was gobsmacked How lack of room he had to work with next to the Rear Engine mount...
Anyway this is the downpipe tacked together and he's making my 3'' system with No silencer up 2morro...Im over the moon with it..
Also My Front bumper is in the final stages of prebing just need some Gold smiths fine stopper then its gettin Primered and Keyed...
Piccys to follow..
DP looks amazing! Bumpers coming along nicely, I should be able to crack on with mine soon hopefully. Have you done any plastic welding to achieve the smooth edge?
Yup should go nicly with my 3'' System...
We Used Apoxy Resing matting which you use on Boats Its a lot harder to work with but once set it dries strong that Normal P20 Fibreglass..
We was going plastic weld it but we needed to get a move on with it...Its very Strong as we used 2 full Fibre glass matts on it....
jamiebennett81
Guest
danny, seriously, WTF is going on with your sig....you aint even had it RR yet, just like the other GT2X sig!
guesstimate bhp
comical fail coming up in 3.....2......1 when it never see's a dyno
cuprachrissy
Guest
yer why has this car NEVER had a rr and always proud to talk about figures? ill blow u out on my k03s!!!!
Similar threads
