What PSI does your custom code run and BHP.

[jwfcms]

Having a change to the custom code remap on friday but not sure yet so just wanted some input of what BOOST pressure yours is running. Im going for stage 2 so any figures on that would be better.

Also what sort of BHP are you getting?

and would you recommend custom code remap? or would you say go for another one.

 

[stucupra r]

my boost peaks at 20-21psi and comes back to around 18-19 psi

yes i would recomend them

 

[jwfcms]

they seem good figures. never seen anything that high for a stage one??

im going to go for it on friday so ill let you know what its like. anymore iunput on a stage 2 with mods etc?

 

[Lee M]

they seem good figures. never seen anything that high for a stage one??

im going to go for it on friday so ill let you know what its like. anymore iunput on a stage 2 with mods etc?

Hi Mate,

I'm still on phase 1 and my car peaks about 20psi and drops off to a stead 17psi ish.

I'm also thinking of a stage 2 map for my car as i've done all the mods required, not sure yet wether its going to be worth it or not.

Please let me know what you think of the phase 2 and also if you have any figures from CC after the map is complete.

Good luck with it.

Cheers

Lee

 

[dirk1978]

my boost peaks at 20-21psi and comes back to around 18-19 psi

yes i would recomend them

It's almost as if custom code's RR got the best out of custom code's map?

 

[J0N]

Mine spikes at 22psi and holds at 20psi. Never had it on the rollers so I don't know it's BHP but it's the driveability thats important and for that I can't fault Custom-Code, been running Phase 1 for about 14 months, 13,500 miles without a single problem.

 

[jwfcms]

had the custom code stage 2 map done and the car is alot better, its smoother but more powerfull and its proved on the diagnostic gauage, the figures are alot better and its getting 210 g/s mass air flow. where it was getting 193-apx before. so a good increase, the software seems alot better and where people say its a smoother map dont be put off by thinking they mean slower, its not at all it just has a equal sort of power through the rev range, it pulls hard to the redline where as other maps tail off early and loose power after 5k

 

[edmong]

Heres mine

dunno what boost im running but gauge isnext on list.

 

[Custom-Code HQ]

Heres mine

dunno what boost im running but gauge isnext on list.

I would expect a 1.3-1.4 bar spike and holding upto 1 bar at the top end.

Some good figures that people are seeing and not just on our RR

Leigh