what have you done to your car today ?

[DuamoLCR]

drove it, then realised its got a knocking sound when im on full lock turning right so im not happy now :-/

I've got the same issue nearly changed everything now but not the ARB bushes


Sent from my iPhone using Tapatalk - now Free

 

[akchappers]

Cracked the screen!
Ak

 

[lmiller]

New heko wind deflectors and..

New jetex air filter and a heat shield drom e bay.

Just ordered my SMF conversion kit too

Sent from my GT-I9505 using Tapatalk 2

 

[supa_sam]

2 new black circles, fresh rubber ready for winter

 

[Pete236]

Looked at it...a lot... sorted out the insurance (at last) and made a booking to get the windscreen sorted. Now deciding where to start modifying....

 

[dgjdrummer]

Finally got round to doing my driver's door seal, took about an hour including removing, re-fitting and swapping over everything over to a new door card as one of the clip retainers had come off mine!

The old stuff that came out looked like this:



All brittle and really hard to scrape off where the water had degraded it. Now to wait for a rainy day to see if it's worked

 

[RaviR50]

washed it and realised its in dire need of a paint correction detail, so if anyone knows anyone near Southampton

 

[bully]

Did some logs on vag-com today as getting it ready for a trackday a silverstone on the 27th October ! Need diverter valve service kit and maf not quite right so gonna give it a clean !!

 

[BoostHard]

Cleaned mine ready for Pod tomorrow and realised I can't polish a turd,

 

[alex4kant]

mounted snow tires and i've changed the oil

 

[drka-drka]

Coil packs died so it gave me the final kick in the ass to fit my 2.0 TFSI coilpacks along with new spark plugs.

Since I had to take the N249 valve and vacum chamber out the way to fit the coil packs I did a bypass. Taking a 4mm vacum hose from the DV to the hose coming from under the manifold connected together using a inline joiner. Simple and cheap

 

[Gingerbread Man]

Cleaned mine ready for Pod tomorrow and realised I can't polish a turd,

I tried to do mine about 10 days ago or so. It is literally physically exhausting man. I washed, dried, applied polish to an area, left it to dry a bit, buff and move on to next area. Honestly it takes a good 2 hours min to do it. Electric buffer added to x max list lol

Sent from my Nexus 7 using Tapatalk 4

 

[LEE69]

And you guys i guess have good health.
Mines get washed by the local hand wash place then son puts a layer of polish on.

 

[googujube]

Just loaded the car boot up with parts and tools for conrod install tomorrow. I'm excited about this like a 5 year old at xmas.

 

[akchappers]

I don't use electric buffers. Hate em. Always seems to leave swirls!
I reckon I can run round the car and polish it quickly in about an hour!
Ak

 

[RaviR50]

Took a picture cos I saw another leon haha

 

[Gingerbread Man]

Got battered today by a medium branch falling from a tree near forest of dean area. Was travelling around 40ish behind other cars and literally out of no where a branch fell from a tree. No time to swerve or break. Properly shat me up. The sound was awful. Nice mark on the roof, windscreen frame painted area, ****ed up my driver side wing mirror. The plastic is cracked, casing loose, glass was hanging off. Pulled over asap and was able to roughly clip it back in place and seems ok and had to re-adjust it. Really wouldn't mind another set though. ******* tree....

Sent from my Galaxy Nexus using Tapatalk

 

[Deleted member 12147]

Had these delivered this morn, ready for fitting at the weekend.

 

[03cupra]

New shocks, springs, wishbones, ball joints and front and rear wishbone bushes..
Acceptable ride again lol

 

[Dougster]

New LED number plate bulbs on my Leon mk1.