time to give bill a call for a 3" tip i think
Yeah I only read Bill's thread about the 3" TIP after I ordered a Forge one![]()
try and send it back. the badger 5 tip makes a massive gain over the forge on![]()
Just fitted the Forge tip expecting a fully fit car....and the noise is still there! Major loss in power, loud 007p and strange turbo soundnew turbo time I think
Hmmm so its worse now ?
Did you check the shaft for play? Take the TIP off the turbo and see if there's any side to side, up and down or in and out movement in the compressor (intake) wheel. There should be none.
Is the car using much oil?
Top the oil back up and check it every few days or so.
As far as I know there should be no more than a tiny amount of play, someone who knows these things better will hopefully clarify.
Have you checked your N75 valve and N249 valves have their cables attached correctly?
try and send it back. the badger 5 tip makes a massive gain over the forge on![]()
N75 is the valve that sits on the TIP, one of the hoses coming off the charge pipe leads into it
N249 is the one on top of the engine block.
Both of these have various rubber hoses which can split and have electric cables which should be checked to see they're attached securely.
Is this actually true, How much in terms of power?
I have a forge one and seemed a 'bit' better than stock, not life changing performance mods IMO..
Chrissy