-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Show off your mk2 ibiza :)
- Thread starter simonthekane
- Start date
well Mr Bhaji - San, you wouldnt say thet if you were close up to the standard alloys, they really could do with a refurb, but that will be someone elses job should they wish. actually vac'd it out too ! couple of little bits and bobs to sort , then its concentrate solely on the Goof.
Banded steels look great Mythbuster ![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
, bet they weigh abit though 
.
Deffo does still look awesome on the standard wheels!
Thanks Arun, the pictures make it look cleaner than it is. Found a tiny bit of rust creep on the side of the car at the rear arches after I cleaned it
. Another job to get fixed.
I know, I know had the bonnet open as I was giving the fiancee's 206 a jump start as I had just changed the radiator and its off the road just now.
And thanks for the comment
, bet they weigh abit though .John, still looks awesome on the standards!
Craig,
Deffo does still look awesome on the standard wheels!
Thanks Arun, the pictures make it look cleaner than it is. Found a tiny bit of rust creep on the side of the car at the rear arches after I cleaned it
. Another job to get fixed.Shut the bloody bonnnet!
*looks good Craig
I know, I know
had the bonnet open as I was giving the fiancee's 206 a jump start as I had just changed the radiator and its off the road just now.And thanks for the comment
Banded steels look great Mythbuster
Thanks!
but yeah, deffo weigh a lot more than the 16 inch alloys I had on while the steelies were being banded Still drives a lot nicer than on the alloys to be fair, lot more stable(then again, alloys didn't fit properly 
)... Seems like it's slower on the steelies as well. Oh well, Slow and (kinda) low for me! @Arun: That pic looks epic, almost looks like it's a toy car with the blurry stuff! But yes it does need a polish, badly... Was going to but I decided repainting and doing up the rear quarters was a bit more important. Will give it a good polish soon though. Still, it's not nearly as faded as it was when I bought it!
Remember this... God, seems like such a long time ago, bit more than a year tho
@Arun: That pic looks epic, almost looks like it's a toy car with the blurry stuff! But yes it does need a polish, badly... Was going to but I decided repainting and doing up the rear quarters was a bit more important. Will give it a good polish soon though. Still, it's not nearly as faded as it was when I bought it!
Remember this... God, seems like such a long time ago, bit more than a year tho
[/QUOTE]
arun, as mythbuster says, it does look like a toy car but its a fab piccy!
Remember this... God, seems like such a long time ago, bit more than a year tho
arun, as mythbuster says, it does look like a toy car but its a fab piccy!
I wanna change the front bumper but gotta wait for more money's lolThat looks pretty sick.
Get them vents cut out of the front splitter
lol steel love is the 1 lol they been banded to 7.5j - 8.5jOooh you copy cat!
Look sick mate!
Oh damn! That's a lot wider than mine lol. Mine are 7j and they're exactly even with the wheelarches(left rear sticks out a bit cause the fender was pushed in)... I didn't dare to go any wider for the Dutch MOT and because I wanted to keep my tires, as I wasn't sure wheither it would be safe to put 185's on 7.5 or 8j's(tireshop boss told me it wasn't, apparantly it's completely safe lol)... Plus I don't know if the Dutch MOT(called the APK) let's you have the rim edges outside of the fenders.
But yeah I have always loved deep dish wheels, wheither it's BBS's like Suj had(with deeper dish) or steel. I really love how you did the yellow part, looks really well done. Gotta say I don't see why I've never seen banded steel on other pre-facelifts before though, imho they're made for banded steel over alloys(same with the Mk2 Golfs)...
EDIT: Also, are they 14 or 15 inch? Looks bigger than my wheels?
But yeah I have always loved deep dish wheels, wheither it's BBS's like Suj had(with deeper dish) or steel. I really love how you did the yellow part, looks really well done. Gotta say I don't see why I've never seen banded steel on other pre-facelifts before though, imho they're made for banded steel over alloys(same with the Mk2 Golfs)...
EDIT: Also, are they 14 or 15 inch? Looks bigger than my wheels?
Last edited:
Mine are 15s n I got 195/45 on there stretched on the 8.5s n only slightly stretched on the 7.5s but wanna get some 185/45 all round, the 7.5s sit just inside n the 8.5s sit just outside the arch. I had 16x9j on before but I hated that they were 16s so sold up n brought these on the same day
There's only one problem with your car Kezz. Whats that thing on the back window? Get it off!
Love it really. I want a red one
the wiper or the sticker
You've obviously not looked at my RR
The wiper hun TBH, I've heard the mk1 BMW 1 series wipers fit that age VAG, That might look a bit better.... grrr. I need my own mk2 to play with
You've obviously not looked at my RR
TBH, I've heard the mk1 BMW 1 series wipers fit that age VAG, That might look a bit better.... grrr. I need my own mk2 to play with
no i havent mate i will have to have a look
now come on i cant be a member of the anti tail docking squad without a tail can i
no i havent mate i will have to have a look
now come on i cant be a member of the anti tail docking squad without a tail can i
Aye, and I have my place in the tail docking register....for now
Similar threads
