MY01 Leon Cupra now with CCFL angel eyes 2 1/2" dp-200cell cat and one box

[kineticz]

Thought about a N75J valve £61 direct from Audi

Also FMIC interested you? You think it's fast now it will pull alot better with those two. What you boosting at mate?

 

[LEE69]

Boost is 13.2 according to the Liquid Gauge, but the gauge in the a pillar reports 12 so not sure lol
Might do them in the future, we'll see

 

[kineticz]

That boost seems low for a remapped 1.8T by about 3-5psi? So yeah you must be losing boost somewhere mate, or maybe that pancake pipe is restrictive

TIP not collapsing is it

I reckon you'd get 225bhp with the extra boost.

 

[LEE69]

pmsl @ TIP
I got it of Adam ages ago just never got it fitted, about time i did i think lol

217 might have been a spike? won't really know till Saturday tbh

Ta for the info was looking about earlier to see what psi a generic map is.

 

[adam cupra 20vt]

Hope all goes well mate, I have a standard valve here if you need one

 

[LEE69]

Thanks mate have one on the way.

 

[LEE69]

Back from the rollers, not happy

http://www.seatcupra.net/forums/showthread.php?t=267534

 

[adam cupra 20vt]

Back from the rollers, not happy

http://www.seatcupra.net/forums/showthread.php?t=267534

Whats it like to drive since the map mate? does it feel better?

 

[LEE69]

Hell yeah, But it could be a problem that as slowly got worse over time and i just havn't noticed it, no fault codes stored either.

 

[LEE69]

20mm Hubcentric spacers, think the front need spacing out a bit, nice stance though

 

[LEE69]

Had the oil and filter changed nice Mobil 1 in there now

Here's a pic of the sump gaurd the car came with

 

[turbo009]

Looks good Lee! what other plans you got for her

 

[LEE69]

Only to space out the fronts at the moment.
Oh got a strut brace and the dog mount bushes to be fitted too.

Noticed a CV boot is split as well, so that needs doing.

 

[kineticz]

Good work Lee nice stance now.

 

[LEE69]

Fitted a Jetex filter now pull 170 g/s
That will do nicely

 

[adam cupra 20vt]

What do you times/divide that by mate to work out BHP?

Thats very good flow for a Cupra isnt it?

 

[LEE69]

I think it's about right for stage 1 mate, I did 170 x 1.25

 

[adam cupra 20vt]

I think it's about right for stage 1 mate, I did 170 x 1.25

Cool, will have to find a laptop up and do some logs on mine, might try standard airbox to if I can get it back on.

 

[LEE69]

Also Bhp was 215
Torque was 195

On my Liquid Gauge

 

[adam cupra 20vt]

Also Bhp was 215
Torque was 195

On my Liquid Gauge

Is that on the liquid gauge? I would have thought you would have had quite a bit more torque then that?