My Cordoba Coupe Trackday Car Project

[RobT]

or....rigidly mount the airhorns whereever you want, bolt a stub to the bottom of them and connect to TB with a silicone bend

 

[F2 Stu]

Jenvey have angled plain bodies which could be used to down angle the backplate to airhorns. I used some of these to angle and space out the induction length.

Would those be the curved spacers for the SF bodies - 4 bolt pattern?

 

[ibizacupra]

yea.

 

[F2 Stu]

Pics from Yesterday

Other side of the box made up, a 10mm flange has been added for the lid to fix and seal against

The rearmost flange requires a bit of work still, it requires notching out for the fuel rail and access around the dipstick

I gave up trying to fab that side out one piece of sheet, sure I could made it simpler lol

lid in place, mouth of the box will be reprofiled as it was made overlength.

 

[WeeJase]

you're good at your craft stu

 

[m0rk]

I was just thinking the same thing.

 

[F2 Stu]

Thanks

Not doing too bad considering I've no guilotine, brake press or folder....

 

[The MoffMeister]

pardon my ignornace stu but what is the fabrication above?

 

[m0rk]

sits behind the grill & feeds air to his inlet trumpets

 

[The MoffMeister]

as i see so a glorified induction kit lol

 

[F2 Stu]

Its an enclosed airbox which collects flowing air from the upper radiator grill, thats why I had that shorter alloy radiator made up

 

[The MoffMeister]

ah now im wiser than before lol cheers stu

 

[WeeJase]

I was just thinking the same thing.

pigeons had been at the welder here though

 

[goble]

http://www.bildon.com/catalog/DetailsList.cfm?ID=2900-1577&Nav=6&SubNav=66

=£151 less shipping

 

[F2 Stu]

http://www.bildon.com/catalog/DetailsList.cfm?ID=2900-1577&Nav=6&SubNav=66

=£151 less shipping

That doesnt exactly duct air from my grill now does it?

An 8x4ft sheet of 0.6mm was £14 + my own labour.

 

[F2 Stu]

pigeons had been at the welder here though

 

[goble]

so the front end of it is going to be totally open without filters on???

 

[m0rk]

so the front end of it is going to be totally open without filters on???

http://www.seatcupra.net/forums/showpost.php?p=1684493&postcount=396

 

[goble]

oh dear

 

[F2 Stu]