tip

I'm slowly getting all the parts for the GTRS conversion and hence I need to get the LCR/S3 etc... TIP. I was thinking, I won't be abel to fit it to my exisiting KO3s and Maf housing as it will be slightly larger..... so it won't be able to go on until I get the full conversion done...

ATP sell their eliminator kit with the option of a 3inch big bore TIP – however it seems that it’s unusable if you have a six speed (as I have). Anyone have any idea how this could be overcome on the 6 speed? Cheers Raf

Revo Stage 2. Std Paper Filter in airbox (with cold feed) T7 HB8 Air temp 8.5 degrees Group A: '003 Group B: '020 Idle speed Air mass in Throt Angle Ignit Angle Idle Stabilization Idle Stabilization Idle Stabilization Idle Stabilization 700-820 rpm 2.0-4.5 g/s 0.2-4.0% 0-12 BTDC...

Top Forge Tip Fitting Tips! Yes, it’s easy for one person to fit a TIP (Turbo Inlet Pipe) from above – without jacking the car up. I had to swap my exhaust manifold and in order to gain access, you need to remove the stock tip. When the time came to put the tip back, I thought I may as...

could do with a lil guide how to fit one of these bad boys got one on the way any help please

Im thinking of buying a TIP for my 02 Leon Cupra,i was just wondering peoples opinion on which one is best to go for,and wether it is a worthwile mod.The car has been remapped by Jabba,so isnt standard. Ive been looking at the Forge TIP,but wanted to know what others are on the market and...

After spending hours getting my car of axle stands high enough for me to get under to release the stock TIP I managed to eventually get the original pipe work out. Even that was a tight fit and I'm having no joy getting the Forge TIP in there! There is a metal pipe which is restricting...

Is it true that you can only get blue red and black TIP's?? As in a Peformance "ford" mag i have they offer samco's in yellow? Can you get the TIP's in yellow????

In need of help. Eversince fitting my samco tip to my ko3s i've been getting spiking in the boost. the map currently on the car is set at 15psi (for now) running laguna front mount cat back scorpion, forge 007pdv, filter. and now a samco tip. since fitting it and replacing a faulty n75 it...

Hey all just another mod, and a shiny one at that so thought id show you!! Before!! After!! Fitting was ok and seems to help the turbo spool up a bit quicker makes good noise to!! So watch this space for more!! LOL :funk: :funk:

I'm going to attempt to put the TIP I bought at inters on at the weekend along with the Forge DV and charge pipe. Is there anything specific I should look out for while doing it? Any tips? Things I can also remove to make things easier for myself? Any specific tools I'll need? Also as...

Right WHAT A SOD!!! The pipe itself wasnt too bad to get off and put the new one on, BUT, that little pipe you need to slide off near the tubo end, i just cant get it back on, any tips ? I kind of tried somre lube but still no joy...... PLEASE LOL I know its a long shot with the match...

Hi. Im about to order the Forge TIP for my new A&M k03s (-00 cupra 1.8t) Quote from Forge: -Dear Sir Thank for the e mail order please can you confirm your engine code . Please confirm you have Ibiza cupra mk3 1.8T ( not cupra R ) cheers peter Wich one will fit the k03s???? I...

can someone tell me if the 2002 Ibiza Cupra R TIP will fit my 2004 leon cupra i have been told it fits golf so i see no reason why it wont fit mine can anyone tell me if it will fit ?

Got an LC with Revo Stage 2 (miltek 3" downpipe, high flow cat, 2.5" xorst, 4bar fpr, kn panel filter) Want smoother power and am aware of the stock tip being restrictive and am currently noticing a compromise in power with the warmer weather setting in. Will be looking at just under...

fitted tip today and never again :( , not having any mechanical skills, fitting the tip was HELL, through out the install i seemed to only know 1 word and that began with F !!, ended up taking collent bottel off CAI off bending all pipe work back :( undoing heat sheild at back off...

Now i have the mk4 golf tip on my car, but i'm not sure which engine code its from, possibly one of the k03 platform golf, now if i was to upgrade to a k03s would this tip fit, as i know the inlet side of the k03s is lareg by about 2-3mm. Cheers. Phil.

OK, so my car being a diesel and all I'm not really looking for a big sound out the back, however I still want a decent tail pipe out the rear end. Being totally skint at the moment and all my mate suggested just getting a decent exhaust trim instead of replacing the actual exhaust, which is...

what the TIP people refer to, what does it mean? cheers rich

My exhaust tailpipes were looking really sorry for themselves so i went out hunting for some Brasso/Silvo or something of the like. THe local shop didn't have any Brasso etc but did have something called 'Bar Keepers Friend' i was a bit dubious but it was only £2.00 so i bought some -...