mount

Hi all does any1 know where i can get a decent boost gauge and pillar mount from? Im looking for the complete Apillar with the gauge part attacthed and not just the add on mount to the pillar???

Any body know of any good sites to get the air vent mount for the mk1 leon? This is the best ive found so far =0 http://www.swgmotorsport.com/asps/ShowDetails.asp?id=256 Cheers!

Well i have just fitted the engine mount kit from THS, it took me about 45 mins very easy and what a difference, i had the DBM from forge and the vibration never went away, now it has, the feel is better and there is no vibration, the old mounts are like jelly compared to the new ones and there...

just fitted my dogbone mount that i got from forge, iv heard that loads of people say that it vibrates, iv done all the bolts up to the correct torque and theres absolutely no vibration, is this normal?

hi new to the site so just wanna say hi before i start asking questions!! ive just got a cordobra 2.0 16valve sx but i have knocking under decletration which i tracked down to the engine mount on the drivers side under further inspection the bolt has snapped in the engine mount!!! leaving me...

Well I've justed swapped my poly bushed dog bone mount for the THS version and all i can say is WOW! I never really got on with the powerflex one, always annoyed me with the low rev vibrations and before anyone says anything it was torqued up correctly :p When i fired up the engine after...

http://cgi.ebay.co.uk/SEAT-IBIZA-CUPRA-TURBO-INTERCOOLER-FMIC-KIT-BLUE_W0QQitemZ250423818432QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3a4e6c38c0&_trksid=p3286.c0.m14&_trkparms=72%3A1683|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50 Are these front mounts any...

Thinking of installing a Parrot bluetooth kit in my Leon. Anyone got any pics of where they have mounted the control and the screen? Alternatively, does anyone have pictures of a brodit iphone mount in action? Cheers :happy:

Out of the two locations pictured below which of the two would you say looks the best? Theres the first one, which is along the length of the car, it doesnt fit between the cage and the rear of the car however, and so the valve has to go on the other side of the cage which im not sure about...

Now the car shakes alot when i try and creep forward on the clutch! is this normal? moment i whack some throttle in it goes away. im 98% sure this is fine just checking tbh.

Hi just a very quick question, i have ordered some coilovers and want to know if £65 sounds right for 4 top mounts? I have got this price from a dealer. Could anyone tell me if this is accurate. Thanks

Took a turn, heard a bang.... bugger! Engine cut out. Didn't have a clue what was going on as there was a hose that had popped off. I'm not very experienced when it comes to inspecting an engine bay so didn't know what this was........ My friend later noticed that my engine mount had sheared...

hi can anyone tell me where i can get a mount to put the boost gauge in the right hand heater vent please:think:

I've searched through all the threads I can find regarding satnav, but I might have missed it. Anyway... Has anyone used a satnav mount such as the one that ARKON make, that clips into one of the air vents? If so, how secure is the fitting, and is it easy to remove? I'm looking to get one...

Hi all, something is up with the beast this morning, driving along listening to music and then I suddenly noticed that the car just felt funny. Well it got my attention, really bad vibrations seems to be coming from the driver side front. Also when changing gears, not all the time there is a...

I'm in the hunt for a front mount on my TDi FR, and the obvious 2 are the Forge Front Mount kit, and the Seat Sport with Forge Pipeing. Can anybody give a quick comparison of the 2, to help me choose which to go for?!

Hi, Was out giving my car a check over and a wee tidy up and noticed how horrible the rusty bolts look on my nicely painted strut brace. Could anyone point me in the right direction where I would pick up some stainless steel ones. Bear in mind my local dealer is an hour away and I'm not...

Guys, Can anyone supply a picture and/or part number of the OEM gearbox mount bush that is commonly replaced by a poly bush to reduce wheel hop (such as the powerflex item below. Thanks, Horace

Hi Guy's, I fitted my Powerlex DBM today but I think I have made a boo boo! I have torqued the 'clamp' bolt to 40Nm, which I think is too much as the vibrations through the car are bad, liveable maybe, but bad! The good thing is that the traction is a 125% better!:D What I need an...

Hi guys, hoping someone can help?!?! Got a 2003/03 1.9Tdi Sport (130)(chipped to 170bhp) and am getting alot of movement (back to front) from the engine in the bay (so bad it has started pulling the intercooler pipe off on a regular basis! even when driving ‘sensibly’) Seen a couple of...